...

Can bar mats go in the dishwasher?

Example thread · fictional members and dates What does this mean?

Viewing 17 posts - 1 through 17 (of 17 total)
  • Author
    Posts
  • #5636
    Deli_Owner_Queens
    Participant

    We put two rubber bar mats under the coffee station and the soda machine this year. They catch everything. Now they’re sticky every night. Soda syrup, coffee drips, the sugar packets somebody always tears over the counter. My closing guy wants to run them through the dish machine with the trays. Is that OK, or am I pulling out two warped mats tomorrow morning?

    Right now we hose them off out back, and in December that means frozen hands and mats that are still wet at six.

    #5637
    BarManager_Austin
    Participant

    Plenty of bars put rubber mats through the dish machine. Mine go through after close every night, as long as they fit the rack. But “rubber mat” covers a lot of products, and some don’t like the heat. Check the care label or the maker’s instructions first. If it says hand wash, believe it.

    The thin, floppy ones are the ones I’d worry about. Thick molded mats usually come through a commercial cycle without trouble. Thin ones can come out wavy, and a wavy mat under a soda machine is a trip hazard and a spill channel at the same time.

    #5638
    Deli_Owner_Queens
    Participant

    No label that I can find. They were part of the coffee setup when we remodeled, and nobody kept the paperwork.

    #5639
    BarManager_Austin
    Participant

    Then test one. Run a single mat through one cycle, flat, and look at it when it comes out. If it’s flat and the edges aren’t curled, the second one goes in tomorrow. If it curls, hand wash from now on, and you’ve only lost one test.

    #5640

    Home kitchen version: I’ve put a small rubber mat in my regular dishwasher on the top rack, and it came out fine. On the bottom rack, close to the heating element, one curled at the corner and never lay flat again. So placement matters even in a home machine. I also skip the heated dry setting for anything rubber. It comes out wet, I lay it flat on a towel, and it’s dry by morning.

    #5641
    BarManager_Austin
    Participant

    That matches what I’ve seen. In a commercial machine, lay it flat on the rack, ridges up, and don’t fold it. A folded mat comes out with a crease that never goes away.

    #5642
    Deli_Owner_Queens
    Participant

    Ridges up? Does it matter which way? I would have put them in face down like a tray.

    #5643
    BarManager_Austin
    Participant

    The spray reaches the grooves better. The gunk lives in the grooves, especially sugar from soda syrup. Ridges down, the flat back gets clean and the grooves stay sticky.

    If your machine has a separate rinse arm on top, it helps to run the mats in their own rack. Packed in with trays, the spray doesn’t reach half the surface, and you end up washing them twice.

    #5644

    For sticky soda syrup, I’d soak first in any case. Hot water, a squirt of dish soap, ten minutes. The syrup dissolves and the machine finishes the job. Without the soak, you get a mat that looks clean and still grabs your shoe.

    A bus tub or a mop sink works for the soak. Don’t use bleach on a mat unless the label says it’s fine. Some rubber goes chalky and stiff with strong chemicals, and then it cracks along the ridges.

    #5645
    CounterMats Team
    Moderator

    Testing one mat first, as BarManager_Austin suggests, is a sensible way to find out, and the care label or the maker’s instructions come first for any mat. We don’t set one dishwasher rule for every mat, because materials and machines differ.

    Our cleaning and maintenance page covers day-to-day cleaning and the habits that help a mat last longer: https://countermats.com/cleaning-and-maintaining-your-counter-mats/

    A printed mat on a counter and a rubber bar mat are different products, so check the care instructions for the specific mat before it goes near a dish machine.

    CounterMats Team · Contact Us

    #5646
    Deli_Owner_Queens
    Participant

    Test run done last night. Soaked first, then flat on the rack, ridges up. It came out clean and flat. The second one goes in tonight.

    I’ll keep an eye on it for a couple of weeks before I call it safe. If the edges start to curl after a few washes, it goes back to hand washing in the mop sink.

    #5647
    BarManager_Austin
    Participant

    Dry them flat or hanging, not folded over the edge of the sink. Wet rubber folded overnight keeps the bend. We hang ours over a dowel on the dry rack, ridges out, so air gets to both sides. By the morning crew they’re bone dry.

    #5648

    And dry them fully before they go back under the machine. A damp mat under a coffee station gets that musty smell fast, and the smell is harder to wash out than the syrup. Lift the mat once in a while during the day as well. Coffee spills run under the edge, and the counter underneath needs a wipe as much as the mat does.

    #5649
    Deli_Owner_Queens
    Participant

    Musty I know. That’s half the reason I wanted them washed in the first place. The other half is customers. A sticky mat right where they lean on the counter is not the impression I want at six in the morning.

    #5650
    BarManager_Austin
    Participant

    Here’s the closing routine at my bar, for anyone who finds this. Pull the mats. Rinse the big stuff into the floor drain. Soak if there’s syrup. One cycle in the machine, flat and ridges up. Hang them on the rack overnight. They go back down at open. About two minutes per mat.

    Once a month we also check every mat for cracks and tears along the ridges. A cracked mat holds dirt in the crack no matter how you wash it, and it’s time for a new one.

    #5651
    Deli_Owner_Queens
    Participant

    Adding it to the closing sheet. My closing guy is happy, since the machine does the scrubbing now.

    #5652

    For anyone with a home kitchen reading this: same steps, smaller scale. Soak the sticky ones, top rack only, no heated dry, lay flat to dry. And if a mat has a printed top or a fabric surface, don’t assume any of this applies. Read the care instructions first, because printed and fabric mats are a different animal from plain rubber.

Viewing 17 posts - 1 through 17 (of 17 total)
  • Log in or create an account to post. Anyone can read.

Log in

Forgot your password?

Join the Counter Mat Forum

Everyone sees this. A role works well instead of your name, for example CStore_Owner_Ohio.

Members, discussions and dates in threads marked Example thread are fictional. CounterMats wrote them to explain common counter mat questions in plain language.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.