...

Dye-sublimation or surface print for a mat that gets wiped all day?

Example thread · fictional members and dates What does this mean?

Viewing 16 posts - 1 through 16 (of 16 total)
  • Author
    Posts
  • #5283

    We’re planning printed mats for the check-in counters at our urgent care clinics. Each mat would carry the clinic logo and three lines of check-in instructions. Staff wipe the counter with disinfectant between patients, so the mat gets wiped dozens of times a day.

    The printers I’ve talked to ask whether we want dye-sublimation or surface print. Which one holds up to that much wiping?

    #5284
    Designer_PDX
    Participant

    The difference first. Surface print puts a layer of ink on top of the mat. Dye-sublimation uses heat to turn the dye into a gas that goes into polyester fibers, so the image sits inside the fabric instead of on it.

    Wiping wears away whatever sits on top. With dye-sublimation there’s no ink layer to scrub off. The catch is that it only works on a polyester fabric top. Rubber and vinyl tops take surface print.

    #5285
    BarManager_Austin
    Participant

    From behind a bar, the question is what lands on the mat. Fabric tops soak up everything. A dye-sub fabric mat looks sharp on day one and smells like sour mix by Friday. We use rubber behind the bar, and the surface print on our logo mats wears first where the bottles hit the well.

    So for a bar, liquid decides it. For a check-in desk, I’d ask what your cleaning liquid does to fabric.

    #5286

    That’s the right question. Our counters see clipboards, pens, ID cards and insurance cards, so no spills. But the wipes are wet, and a fabric top might stay damp after each wipe.

    I asked our infection prevention lead. Her answer was short: she wants a surface that doesn’t hold liquid and dries fast. That’s her call, not mine.

    #5287
    PromoBuyer_Chicago
    Participant

    Then you’re probably choosing a smooth top with surface print, and the next question is how that print handles your chemistry. Ask each printer whether a clear protective coat goes over the ink, and give them the exact disinfectant your clinics use, by product name, plus how often staff wipe.

    If you already have any printed mat in the building, run your own test. Wipe one corner fifty times with your actual wipes and look at the wipe. Color on the wipe means the ink is coming off.

    Also ask whether the disinfectant leaves a film. Some do, and a film on a smooth top turns sticky after a week. That isn’t the print failing, but staff will blame the mat.

    #5288
    Designer_PDX
    Participant

    One print-quality point for the instructions. Dye-sub on fabric gives slightly soft edges, so small text can look fuzzy. Surface print on a smooth top keeps small type crisp. Your three lines of instructions will read better on the smooth top anyway.

    Even so, set them large. Someone reads a check-in mat from standing height, often while holding a sick child. Short lines and big type help more than any print method. Three lines of eight words each is about the limit before people stop reading.

    #5289

    Good point on the reading distance. I printed the instructions on paper at three sizes and laid them on the counter. The middle one was the smallest anyone on staff could read without leaning in.

    #5290
    BarManager_Austin
    Participant

    Watch where people wipe. My staff scrub hardest at the corners and along the front edge, because that’s where the sticky stuff collects. The print fails there first. Keep your logo and instructions in the middle and leave the edges plain.

    #5291
    CounterMats Team
    Moderator

    What touches the mat decides the print method, and this thread found that out quickly.

    Our printing page covers how surface printing works and where it falls short, how dye-sublimation works, why the method matters more than most buyers expect, what to ask before you order and how to match the print method to the way the mat will be used.

    We don’t rate print methods against a specific disinfectant in the forum. List the wipes your clinics use and how often staff wipe in your quote request, and we’ll answer for the material you choose. Printed Duramat mats come in 12 x 18 in, 16 x 20 in (our most popular size) and 18 x 24 in, and the product page shows the current price: https://countermats.com/product/duramat-counter-mat/ Every printed order gets a free digital proof within 1 business day, so you can check that the instructions read clearly before anything prints. The minimum order is 50 mats.

    Dye-sublimation versus surface print, side by side: https://countermats.com/counter-mat-printing-dye-sublimation-vs-surface-print/

    CounterMats Team · Contact Us

    #5292
    PromoBuyer_Chicago
    Participant

    Writing the disinfectant into the quote request is the step most buyers skip. Put the wipe frequency in too. “Wiped often” means nothing to a printer. Forty times a shift means something.

    #5293

    How often do people replace mats in a setting like ours? I’d rather budget a replacement cycle now than argue for it after the first mat looks tired. Our infection prevention lead also wants a rule for when a mat comes out of service: any tear, any lifting edge, any print worn through.

    #5294
    BarManager_Austin
    Participant

    Behind my bar, mats get replaced when they curl or the logo’s gone, roughly once a year. When you replace, replace every mat in the same room at once. One new mat next to an old one makes the old one look worse than it is. Your counter is gentler but wiped more often. Plan for a year and be pleasantly surprised.

    #5295
    Designer_PDX
    Participant

    Set up the artwork file so a replacement is the same job every time. Save the final file with the clinic name and size in the file name, and keep the approved proof with it. When a mat needs replacing at one clinic, nobody has to rebuild anything. Keep a note of the disinfectant and the wipe count with that file, so the next quote request starts from the same facts.

    #5296

    Here’s where I landed. Smooth top, surface print, logo and instructions in the middle, plain edges. We’ll pilot at two clinics for three months and photograph the mats on the first day and the last day at the same angle. If the edges hold, we roll out to the rest.

    #5297
    PromoBuyer_Chicago
    Participant

    A pilot with photos settles the argument before the big rollout instead of after. Put a date on the second photo so it actually gets taken.

    #5298

    It’s on the calendar. I’ll post the three-month photos here.

Viewing 16 posts - 1 through 16 (of 16 total)
  • Log in or create an account to post. Anyone can read.

Log in

Forgot your password?

Join the Counter Mat Forum

Everyone sees this. A role works well instead of your name, for example CStore_Owner_Ohio.

Members, discussions and dates in threads marked Example thread are fictional. CounterMats wrote them to explain common counter mat questions in plain language.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.