...

How thick should a mat be at a register that gets slammed all day?

Example thread · fictional members and dates What does this mean?

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • #5224
    CStore_Owner_Ohio
    Participant

    Both my stores run about 600 transactions a day at the front register. Coffee in the morning, lottery and tobacco all day, and a beer rush on Friday. I want a printed mat at each register, and I keep going back and forth on thickness.

    Thin seems easier to clean and cheaper to replace. Thick seems like it will last. Which one survives a counter like mine?

    For context, the counters are laminate, about 24 inches deep, and the night crew wipes them down with a spray cleaner at close. The mats would sit in front of the register where people drop their stuff, not under any equipment.

    #5225
    Deli_Owner_Queens
    Participant

    Thin mats slide. On my counter, people drop a sandwich, a drink and a bag of chips at once and push them toward me. A thin mat moves with the pile and ends up hanging over the edge by lunch. A heavier mat stays put because of its own weight, not because of anything on the bottom.

    #5226
    PartsDesk_Wichita
    Participant

    I’ll second that from the parts side. We set brake rotors, water pumps and catalogs on the counter all day. A thin mat got cut by a rotor edge in the first week. A thicker rubber mat takes the hit and springs back. If heavy or sharp things touch your counter, go thicker.

    #5227
    CStore_Owner_Ohio
    Participant

    Nothing sharp, but a lot of coins. That’s my other worry. Customers slide change across the counter, and my cashiers have to pick it up. Does a thick, soft mat make coins harder to grab?

    #5228

    It can, depending on the surface. A soft textured top holds coins down, and people dig for them. A smoother, firmer top lets you slide them off the edge into your hand.

    From the cleaning side, texture matters more than thickness. Our clinics wipe every surface with a disinfectant several times a day. A textured mat holds grime in the grooves, and after a few months you see a gray film you can’t wipe out. Smooth tops wipe clean faster, whatever the thickness.

    Also check the underside. A mat that traps liquid underneath will start to smell, and on some counters it leaves a mark. We lift ours once a week, wipe the counter under it and let both dry before putting the mat back. A heavier mat is a little more work to lift, but it also lets less liquid run under it in the first place.

    #5229
    Deli_Owner_Queens
    Participant

    Watch the edges too. A thin mat with a straight cut edge curls after a few weeks of spilled coffee and wiping. Then the curled corner catches every bag and sleeve. A thicker mat with a beveled edge stays flat and nothing catches.

    #5230
    CStore_Owner_Ohio
    Participant

    OK, so far it sounds like thicker, firm, smooth top, beveled edge. Is there such a thing as too thick? I don’t want people setting a coffee down on something that feels like a yoga mat.

    #5231
    PartsDesk_Wichita
    Participant

    Yes. If customers sign paper slips or write on the counter, a very thick soft mat makes the pen push through and the signature looks drunk. We still have a few customers who sign on paper. For a register, I’d stay around a quarter inch or under. Thicker than that, and it starts to feel like a step.

    The other thing with very thick mats is the edge height. Cups and bottles that get set half on the edge tip over. At a parts counter, nobody sets a coffee down. At a c-store with a coffee bar, half your customers are holding one.

    #5232
    CounterMats Team
    Moderator

    This thread already covers most of what we tell people, so a few notes. The right thickness depends on what sits on the mat: coins, cups, heavy parts or paper slips. That’s why we don’t give one number for every counter.

    Our thickness guide walks through thin mats for light counters, mid-weight mats for standard commercial use and thicker mats for high-abuse spots, plus why thickness changes how the edge holds up: https://countermats.com/counter-mat-thickness-what-to-choose-and-why-it-matters/

    For a printed mat at a busy register, our most popular size is 16 x 20 in. The per-mat price drops as the quantity goes up, and the current price is on the Duramat product page: https://countermats.com/product/duramat-counter-mat/ We charge no setup fees, and every printed order gets a free digital proof within 1 business day.

    CounterMats Team · Contact Us

    #5233
    CStore_Owner_Ohio
    Participant

    The edge part is what I needed. I’ll read the guide tonight after close.

    #5234

    One more test I’d run before deciding. Take whatever cleaner your night crew uses and wipe a sample of the surface with it a few dozen times, the way they really do it, fast and wet. If the print or the top changes, you know before you have mats at every register.

    #5235
    Deli_Owner_Queens
    Participant

    And don’t let the night guy use the degreaser on it. Ask me how I know.

    #5236
    CStore_Owner_Ohio
    Participant

    I read the guide and talked with my store managers. Where we landed: mid-weight, firm smooth top, beveled edges, at both front registers. The lottery counter gets the same, since it sees the most coins. Our back counter for deliveries doesn’t need a printed mat at all.

    Thanks, everyone. The coin question alone was worth asking.

    #5237
    PartsDesk_Wichita
    Participant

    Sounds right for a c-store. Come visit a parts counter sometime if you want to see what thick really means.

    #5238

    Good plan. Write down the date the mats go on the counter and check the edges and the print every few months. When you know how long one lasts at your busiest register, you can plan replacements before they look worn instead of after a customer points it out.

Viewing 15 posts - 1 through 15 (of 15 total)
  • Log in or create an account to post. Anyone can read.

Log in

Forgot your password?

Join the Counter Mat Forum

Everyone sees this. A role works well instead of your name, for example CStore_Owner_Ohio.

Members, discussions and dates in threads marked Example thread are fictional. CounterMats wrote them to explain common counter mat questions in plain language.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.