...

How do you clean rubber bar mats at close without wrecking them?

Example thread · fictional members and dates What does this mean?

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • #5408
    BarManager_Austin
    Participant

    Just closed. Fourteen seats at the rail and every one of them spilled something tonight. We have rubber bar runners on the rail and under the wells, and two of them have our logo printed on top.

    My closers clean them every night, and the logo on one is already fading after a few months. What’s your routine at close? I want something that gets the sticky off without wrecking the print.

    The plain runners under the wells are fine, they just get gross. The printed ones on the rail are what guests see, and right now one looks like it’s been through a war. I’d rather fix the cleaning than keep replacing them.

    #5409
    Deli_Owner_Queens
    Participant

    What are they cleaning with? Nine times out of ten, a fading print means somebody is using the strong stuff. My night guy once used oven degreaser on a printed mat because “it gets everything off.” It did. Including the print.

    #5410
    BarManager_Austin
    Participant

    Checked with the closers. They use whatever’s in the spray bottle under the well, which is sometimes the sanitizer and sometimes a degreaser someone mixed too strong. And they scrub with the green pad.

    #5411

    There’s your answer, two of them actually. The green scrub pad is abrasive, and it wears down any printed surface. The strong degreaser does the rest.

    Our clinics disinfect everything, so I’ve tested a lot of routines. Here’s what holds up on rubber:
    – Rinse with warm water to get the sugar off first
    – Wash with mild dish soap and a soft brush or cloth
    – Rinse again so no soap film is left
    – Air dry flat or hanging, not folded

    If you use a sanitizer, mix it at the strength on the label and rinse after the contact time. More concentrate doesn’t make it cleaner, it just eats the surface faster.

    #5412
    BarManager_Austin
    Participant

    Soft brush, mild soap, proper mix. I can train that. What about the dish machine? Half my staff wants to throw the runners in with the glass racks.

    #5413
    FrontOffice_Vegas
    Participant

    Our hotel bar went through the same debate. Some rubber mats are made to go through a commercial dish machine and some warp from the heat. Look on the mat or the paperwork for a dishwasher note. If there isn’t one, I wouldn’t risk it on the printed ones. Plain rubber runners are a different story than printed ones.

    #5414

    Agree. Heat is the other print killer, next to scrubbing. Even a mat that survives the machine can fade faster from the hot rinse.

    Sun counts too, if any of your rail gets afternoon light through a window. We moved a printed mat at one clinic away from a west window and the fading slowed down a lot. Not much you can do about the sun at a bar, but it’s worth knowing which runner gets it.

    #5415

    Not a bar, but I have a rubber mat by my kitchen sink that gets the same treatment. One thing nobody mentioned: let it dry completely before you put it back. If you put a damp mat down on the counter overnight, you get a musty smell by the end of the week, and on my quartz I got a faint ring under it.

    #5416
    CounterMats Team
    Moderator

    Good routine in this thread. Every step ClinicFacilities_PHX lists is the gentle approach we’d point to as well.

    The right cleaning method depends on the material, so our care guide splits it up: rubber and vinyl, fabric-topped and dye-sublimated mats, clear mats, antimicrobial surfaces and dry-erase surfaces. For printed rubber, the takeaway matches what’s above. Avoid harsh scrubbing and strong chemicals, and dry the mat fully before putting it back.

    Cleaning by material type: https://countermats.com/counter-mat-care-cleaning-by-material-type/

    If you have questions about a mat you already have, send us the details through Contact Us and we’ll reply within 1 business day.

    CounterMats Team · Contact Us

    #5417
    BarManager_Austin
    Participant

    OK, new close checklist for the runners, taped inside the cabinet under the well:
    1. Rinse warm
    2. Dish soap, soft brush, no green pad
    3. Rinse again
    4. Hang over the rail to dry
    5. Sanitizer at label strength only

    The green pads are banned from the bar. I’ll keep them for the floor drains.

    #5418
    Deli_Owner_Queens
    Participant

    Label the sanitizer bottle too. A spray bottle with no label ends up with whatever someone mixed at 2 a.m. In my place the degreaser lives on a different shelf from everything else now, with a sign that says grill only.

    #5419
    FrontOffice_Vegas
    Participant

    Good call. We put the mix ratio on a sticker on every bottle. Fewer surprises for the morning crew.

    We also keep the printed mats and the plain ones on separate drying hooks. The plain ones can take a harder scrub when they need it. The printed ones never see the scrub brush. When they hang on the same hook, the closers treat them the same.

    #5420
    BarManager_Austin
    Participant

    A month in. The printed runner that was fading hasn’t gotten worse, and the one that was fine still looks new. The closers say the soft brush is actually faster because they don’t have to rinse out the green pad gunk. Checklist stays.

    #5421

    That’s the best kind of result. A checklist people follow beats a perfect one nobody reads.

    #5422

    Stealing the checklist for my kitchen. Minus the floor drains.

    At home I added one step: lift the mat and wipe the counter under it every few days. Sugar and water find their way underneath, and quartz is easy to clean but not if you never look. Since I started doing that, the faint ring I mentioned hasn’t come back.

Viewing 15 posts - 1 through 15 (of 15 total)
  • Log in or create an account to post. Anyone can read.

Log in

Forgot your password?

Join the Counter Mat Forum

Everyone sees this. A role works well instead of your name, for example CStore_Owner_Ohio.

Members, discussions and dates in threads marked Example thread are fictional. CounterMats wrote them to explain common counter mat questions in plain language.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.