What file does a printer need for a logo on a mat?
Example thread · fictional members and dates What does this mean?
- This topic has 14 replies, 5 voices, and was last updated 1 year, 8 months ago by
Designer_PDX.
- AuthorPosts
- March 4, 2025 at 8:14 pm #5239
BikeShop_Boise
ParticipantI have a logo that a friend made for me two years ago. What I have on my laptop is a PNG that looks great on our website and on my phone. I want it on a mat at the register for opening day.
Is a PNG good enough to print? Every printer page I read says something different, and half of the words I don’t know.
March 4, 2025 at 9:30 pm #5240Designer_PDX
ParticipantWelcome to the club. Most of my small-business clients start exactly where you are.
Short answer: a PNG is usually not enough. A website PNG is made for a screen, often around 500 to 1,000 pixels wide. On a mat, it gets stretched to a much bigger size and the edges turn soft and blocky.
What a printer wants is a vector file. That’s a file where the logo is made of shapes, not pixels, so it stays sharp at any size. The usual formats are AI, EPS, SVG or a PDF saved from the design program. Ask your friend for the original file. If they made it in a design program, they have it.
A quick way to tell what you have: zoom in on the logo as far as your screen goes. If the edges turn into little squares, it’s pixels. If the edges stay smooth no matter how far you zoom, it’s a vector.
March 4, 2025 at 9:52 pm #5241BikeShop_Boise
ParticipantI’ll text him. What if he doesn’t have it anymore?
March 5, 2025 at 8:10 am #5242Designer_PDX
ParticipantThen a designer redraws it as a vector. For a simple logo, it’s a small job. Don’t let anyone just run your PNG through an automatic converter. Those tools turn smooth curves into lumpy ones, and you notice it the moment the logo is big.
If the mat uses a photo instead of a logo, the rule is different. A photo stays pixels, so it needs enough of them: 300 pixels per inch at the final printed size is the usual target.
March 5, 2025 at 9:35 am #5243GiftShop_Asheville
ParticipantColor was my surprise. My shop’s logo is a specific teal, and on screen it looked perfect. When I printed it on flyers at the copy shop, it came out closer to green. Screens make color with light and printers make it with ink, so some bright screen colors just don’t exist in ink.
If your logo has a color that matters to you, find its official color code. A designer can tell you which one.
March 5, 2025 at 10:20 am #5244Designer_PDX
ParticipantRight. For logos, I give clients the color as a Pantone number and as CMYK values. The printer matches whichever they print with. And always judge color on a printed proof or in daylight, never on a phone at night with the brightness turned down.
March 5, 2025 at 12:44 pm #5245BikeShop_Boise
ParticipantThis is a lot. What is bleed? I keep seeing it.
March 5, 2025 at 1:30 pm #5246Designer_PDX
ParticipantBleed is extra artwork past the edge of the mat. Cutting is never perfectly precise, so if your background color stops exactly at the edge, a tiny white line can show on one side after the cut. With bleed, the color runs a little past the cut line and the cut lands inside it.
The opposite is the safe zone. Keep your logo and text a bit inside the edge so nothing important gets trimmed. On a counter where the edge takes wear, that matters even more.
March 5, 2025 at 3:05 pm #5247PromoBuyer_Chicago
ParticipantFrom the buying side: when you send artwork anywhere, ask what you will see before it prints. I want a proof at the real size, with the cut line and the safe zone marked, and I want a clear point where I say yes. If a printer starts without your yes, you own whatever comes out.
Also keep the text short. Owners always want to add the phone number, the website, the hours and the address. On a mat, two of those is plenty.
March 6, 2025 at 10:05 am #5248CounterMats Team
ModeratorDesigner_PDX has laid this out clearly, and we’d add very little. Our artwork setup page covers the same ground in more detail: screen resolution versus print resolution, screen color versus print color, bleed and safe zones, and why text needs more room than it looks like it needs.
https://countermats.com/counter-mat-artwork-setup/
On how we handle it: every printed order gets a free digital proof within 1 business day, so you check the logo, the color and the edges before approving. We charge no setup fees. Printed mats ship 5 business days after proof approval.
CounterMats Team · Contact Us
March 6, 2025 at 6:40 pm #5249BikeShop_Boise
ParticipantMy friend found the original file. It’s an AI file, and he says the color was a stock blue he picked from a swatch book, so it has a number. I feel like I passed a test.
March 6, 2025 at 7:15 pm #5250Designer_PDX
ParticipantYou did. One last tip: ask him to save a version with the text turned into outlines. If the file has live text and the printer doesn’t have the same font, the computer swaps in a different one.
March 7, 2025 at 8:50 am #5251GiftShop_Asheville
ParticipantAnd print the mockup on paper at real size and put it on the counter. My logo looked huge on screen and tiny on the counter. I made it bigger on the second try.
March 7, 2025 at 5:22 pm #5252BikeShop_Boise
ParticipantDone and done. Outlined version is saved, and the paper mockup is taped on the counter next to the register. It does look small, so the logo is going up a size. This forum saved me from printing my website PNG.
March 7, 2025 at 6:40 pm #5253Designer_PDX
ParticipantNice work. Save all of it in one folder: the original file, the outlined version and a note with the color numbers. The next time you need a sign, a shirt or a sticker, you hand over that folder and skip this whole conversation.
- AuthorPosts
- Log in or create an account to post. Anyone can read.