...

What keeps a mat from sliding on a glass display counter?

Example thread · fictional members and dates What does this mean?

Viewing 16 posts - 1 through 16 (of 16 total)
  • Author
    Posts
  • #5519
    GiftShop_Asheville
    Participant

    My register sits on a glass display case. Jewelry from local makers underneath, the register, a card reader and a mat on top where customers set things down. The mat slides. Every time someone pushes a stack of postcards across, it moves an inch toward the edge. Twice this month it went over the side with a mug on it. The second time the mug was full, and a customer’s scarf caught most of the coffee. I gave her a candle to say sorry, but I’d rather not make that a habit.

    What keeps a mat in place on glass? I can’t drill or glue anything, because the case belongs to the landlord.

    #5520

    Glass cases are our whole sales floor, so I’ve fought this one for years. First question: what’s on the back of your mat? A smooth vinyl or fabric back on glass is basically a sled. A rubber or textured backing grips much better.

    Second, clean the glass under the mat. Glass cleaner leaves a film, and a film plus dust is slippery. We wipe the spot with isopropyl alcohol, let it dry, and only then put the mat down.

    #5521
    GiftShop_Asheville
    Participant

    The back is smooth and kind of shiny. I never looked until now. I’ve also been cleaning the glass with the same spray every morning, so that explains a lot.

    #5522
    Pharmacy_Mgr_Tampa
    Participant

    Our pickup counter is laminate, not glass, but we had the same slide. Two things helped. The mat was too small for the space, so people pushed against its edge instead of setting things on it. A larger mat that reaches the back of the counter has less room to move. And we placed it so the card reader sits on top of a corner. The reader’s weight pins it down.

    We also stopped wiping the counter with a spray that leaves a shine. It looked clean, but everything slid on it, including the prescription bags.

    #5523

    The equipment trick is good. On glass, make sure nothing heavy with hard feet scratches the glass through the mat. Put felt pads under the register feet if you’re unsure. Glass scratches are permanent, and on a rented case they come out of your deposit.

    #5524
    GiftShop_Asheville
    Participant

    Is there something I can put under the mat I already have? I’m not ready to replace it yet.

    #5525

    A few things people use:
    – Rubber shelf liner, cut a little smaller than the mat so it doesn’t show at the edges.
    – Small clear silicone bumper dots, the kind for cabinet doors, one under each corner.
    – Removable museum putty, a pea-size piece under each corner.

    Test whatever you use on a corner of the glass first and check that it peels off clean after a week. Some putties leave an oily ring on glass, and your landlord will notice it at move-out.

    #5526
    Pharmacy_Mgr_Tampa
    Participant

    Careful with liner on a display case. Customers look down through the glass at the jewelry. If the mat sits over part of the display and the mat is clear, a waffle-pattern liner under it looks messy. Under a solid mat nobody sees it.

    The dots are the least visible option on glass. Put them a little in from each corner, not right on the corner, or they show as bumps when someone leans on the edge.

    #5527
    GiftShop_Asheville
    Participant

    Solid mat, but it does cover the left third of the case. I’ve been meaning to rethink that anyway, because the best pieces are under there and nobody sees them.

    #5528
    CounterMats Team
    Moderator

    On glass, the backing and a clean surface do most of the work, and Dispensary_GM_Denver’s alcohol wipe is the step most people skip. Placement matters as well. A mat that fills the working space and sits under the register or card reader has much less room to move than a small one floating in the middle.

    Our page on anti-slip backing explains why it matters for safety, for how long a mat lasts, for keeping a branded mat straight and readable, and for protecting the surface underneath: https://countermats.com/anti-slip-backing-in-counter-mats/

    If you replace the mat, measure only the area customers actually use on top of the case and leave clear the part of the display you want people to see. Our standard printed sizes are 12 x 18 in, 16 x 20 in and 18 x 24 in, and custom sizes and shapes are quoted, so a mat can be cut to cover the working part of the glass and nothing else.

    CounterMats Team · Contact Us

    #5529

    That last point is the one I’d push on. Our cases used to have a mat across the whole top. We cut back to the register zone, and the product under the glass started moving. Customers can’t want what they can’t see. We also lost the habit of customers stacking bags on top of the display, because the mat now tells them where the working space ends.

    #5530
    GiftShop_Asheville
    Participant

    So the plan is a narrower mat, only on the right two-thirds, with the register sitting on it, and clean glass underneath. The left third becomes a window onto the jewelry again.

    #5531
    Pharmacy_Mgr_Tampa
    Participant

    Check the card reader cable too. On ours, the cable pulled the mat every time someone tilted the reader to tap a card. We rerouted the cable so it runs off the back edge instead of across the front.

    #5532
    GiftShop_Asheville
    Participant

    Oh, that’s mine. The cable runs right across the front corner, and customers pull the reader toward them. Moving it today.

    #5533

    In winter, glass gets cold overnight, and on humid mornings you can get a little condensation under the mat. Lift it once a week and wipe both sides dry. A damp layer under a mat slides like ice, whatever the backing.

    #5534
    GiftShop_Asheville
    Participant

    Update for anyone who finds this: alcohol wipe on the glass, four silicone dots under the corners, the register moved onto the mat and the reader cable rerouted to the back. A full day of postcard stacks and the mat hasn’t moved. The jewelry case looks better with the left side uncovered, too. Two pairs of earrings sold from that corner yesterday.

Viewing 16 posts - 1 through 16 (of 16 total)
  • Log in or create an account to post. Anyone can read.

Log in

Forgot your password?

Join the Counter Mat Forum

Everyone sees this. A role works well instead of your name, for example CStore_Owner_Ohio.

Members, discussions and dates in threads marked Example thread are fictional. CounterMats wrote them to explain common counter mat questions in plain language.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.