...

What size bar mat fits behind a service well?

Example thread · fictional members and dates What does this mean?

Viewing 16 posts - 1 through 16 (of 16 total)
  • Author
    Posts
  • #5670
    BarManager_Austin
    Participant

    We’re redoing the service station at the end of the bar, where servers pick up drinks. Right now it’s a bare stainless ledge in front of the service well, and every ticket leaves a ring. I want a mat there with our logo that drains and doesn’t slide.

    The ledge is about 30 inches long and 6 inches deep, with a lip on the guest side. Behind the well there’s also a flat stretch of back bar where we build drinks, about 18 inches deep. Do bar mats come in a standard size for spots like these, or does every bar end up measuring and going custom?

    #5671
    Deli_Owner_Queens
    Participant

    Not a bar, but my coffee station has the same problem. Measure the flat part only. That lip on the guest side eats an inch, maybe more, and a mat that rides up on a lip rocks every time somebody sets a cup down. Ask me how I know.

    #5672
    TradeMktg_Atlanta
    Participant

    We place branded bar mats in our accounts all the time, so I see a lot of bars. Two shapes come up almost every time. Rail mats are long and narrow, roughly 3 to 4 inches wide and about 2 feet long, made for the drink rail on the guest side. Service mats are wider, somewhere around a sheet of paper or bigger, for the spot where drinks get built or picked up.

    For a 6-inch ledge, a rail mat is too narrow and a service mat is too deep. That in-between size is the one that ends up custom at a lot of bars.

    #5673
    BarManager_Austin
    Participant

    That matches what I see. The rail runner on the guest side is narrow and long and fits fine. The ledge is the problem child. What do you leave around the edges? Flush to the ends, or a gap?

    #5674
    Deli_Owner_Queens
    Participant

    Gap. Half an inch at each end at least. Flush looks great on day one, then the mat creeps, hangs over the edge, and somebody catches it with a tray.

    #5675
    TradeMktg_Atlanta
    Participant

    I’d leave more than that at a service station. Servers come in fast from the side. If the mat ends right where a hip or a tray passes, it gets dragged every shift. On a 30-inch ledge I’d look at something around 26 inches long so there’s room on both ends.

    Depth works the other way. You want the mat as deep as the flat part of the ledge, so glasses never sit half on and half off. A rocking glass spills more than a bare ledge ever did.

    #5676
    BarManager_Austin
    Participant

    Measured again with the lip in mind. The flat part is 5 inches deep, not 6. Length is 30, but the end near the POS has a ticket printer bolted on, so the usable run is about 25 inches. With a gap on each end I’m looking at something like 5 x 23. Nobody keeps that on a shelf, right?

    #5677
    CounterMats Team
    Moderator

    Measuring the flat area first and then taking off the lip and the bolted-on equipment is the right order. A ledge like the one you measured is a custom size, and that’s common at service stations.

    Our bar mats page shows the options and the current price: https://countermats.com/product/bar-mats-product/ A custom size or shape is quoted, so send the ledge measurements and a photo of the station with your quote request. We charge no setup fees, every printed order gets a free digital proof within 1 business day, and printed mats ship 5 business days after proof approval. The minimum order is 50 mats.

    For the back bar, the same method works. Measure the flat build area, then mark anything that stays put, like the ice bin edge or a cutting board.

    CounterMats Team · Contact Us

    #5678
    BarManager_Austin
    Participant

    Fifty mats is more than one bar uses. Between the ledge, the back bar and a couple of spares, we’d go through maybe eight a year.

    #5679
    TradeMktg_Atlanta
    Participant

    That’s why so many logo bar mats in town carry a brand’s name instead of the bar’s. A brand spreads one run across dozens of accounts. If you want your own logo, the usual move is to split a run with a sister bar or the owner’s other places, or print one design for every spot behind the bar: rail, ledge and back bar.

    #5680
    Deli_Owner_Queens
    Participant

    Or keep spares. A logo mat that fades or gets burned by a hot pot is gone, and having a stack in the back beats waiting on a reprint. Whatever you pick, check the top too. A flat top under drinks turns into a puddle. Ribbed or waffle tops let the spill sit below the glass.

    #5681
    BarManager_Austin
    Participant

    Good point on the top. The ledge gets more spills than anywhere else because servers grab four glasses at once.

    Back bar numbers, for anyone else measuring: the build area is 18 inches deep and about 40 long, but the ice bin lip takes 2 inches and the cutting board lives on the left third. So the mat space is roughly 16 deep and 24 long. That one looks close to a standard service mat size.

    #5682
    TradeMktg_Atlanta
    Participant

    It is close. Check one more thing before you settle it: where the bartender’s hands land. On the back bar, a mat that reaches under the bottle well gets soaked from the bottom up. Stop it an inch short.

    And on the narrow ledge mat, keep the logo to one line. A 5-inch-deep mat gives you maybe 3 inches of print height once you allow for the edge. A stacked logo turns into a smudge at that size.

    #5683
    BarManager_Austin
    Participant

    Our logo is a wordmark with a small icon, so one line works. Here’s where I landed, in case it helps the next person:

    • Measure the flat part only, after the lip
    • Take off anything bolted down
    • Leave room at each end where trays and hips pass
    • Ledges and odd stations are usually custom; back bars are often close to standard
    • One-line logo on narrow mats
    • Ribbed or drained top where drinks land
    #5684
    Deli_Owner_Queens
    Participant

    Add one: tape a piece of cardboard cut to the size on the ledge for a Saturday. If servers knock it around, the mat will get knocked around too.

    #5685
    BarManager_Austin
    Participant

    Did the cardboard test tonight, mostly to prove you wrong. It stayed put but the right end got clipped twice by the tray stand. Taking another inch off that side.

Viewing 16 posts - 1 through 16 (of 16 total)
  • Log in or create an account to post. Anyone can read.

Log in

Forgot your password?

Join the Counter Mat Forum

Everyone sees this. A role works well instead of your name, for example CStore_Owner_Ohio.

Members, discussions and dates in threads marked Example thread are fictional. CounterMats wrote them to explain common counter mat questions in plain language.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.