What size mat fits a checkout with a card reader and a scale on it?
Example thread · fictional members and dates What does this mean?
- This topic has 13 replies, 5 voices, and was last updated 1 year, 9 months ago by
GiftShop_Asheville.
- AuthorPosts
- February 11, 2025 at 6:52 am #5196
Deli_Owner_Queens
ParticipantMy checkout counter is 22 inches deep and a little over 5 feet long. On it I have the register, a card reader on a swivel stand, a deli scale, a tip jar and a gum rack that I refuse to give up.
I want a printed mat where people put their stuff down to pay. What size actually fits? Last month I cut down an old rubber mat from the back to test the idea, and the scale sat half on it and rocked all day. My guys hated it.
February 11, 2025 at 8:14 am #5197CStore_Owner_Ohio
ParticipantMeasure the free space, not the counter. The counter is 22 inches deep, but you can’t use 22 inches. Put everything in its working spot first: register, reader, scale, the gum rack, even the tip jar. Then tape off the rectangle where customers actually set things down. That rectangle is your mat.
And keep the scale off the mat completely. A scale on anything soft can wobble and read wrong, and the weights and measures inspector who checks ours wants it flat on the counter. Leave an inch or two between the scale feet and the mat edge.
February 11, 2025 at 8:40 am #5198Deli_Owner_Queens
ParticipantScale stays on the bare counter, got it. What about the card reader? The stand has a round base about the size of a saucer.
February 11, 2025 at 10:03 am #5199GiftShop_Asheville
ParticipantI went back and forth on that one. If the base sits on the mat, the reader slides a little every time someone turns it, and the mat starts to creep toward the customer. I keep the stand on the bare counter and put the mat right in front of it.
That spot works better anyway. People stare at the reader while the payment goes through, so the mat in front of it gets a few seconds of attention from everybody.
February 11, 2025 at 12:47 pm #5200BikeShop_Boise
ParticipantFollowing this. I open my first shop in the spring and my counter is 24 inches deep. Is there a rule of thumb for how much of the depth the mat should take? I was going to go as big as possible because bigger seems like more space for the logo.
February 11, 2025 at 2:22 pm #5201CStore_Owner_Ohio
ParticipantBigger isn’t better here. My mats sit in the front half of the counter, where customers put their stuff. The back half is mine: register, cash drawer, the lottery terminal. If the mat runs under my equipment, I can’t wipe around it, and the edges get beat up from things sliding over them.
Also keep the mat about an inch back from the front edge. If it hangs right at the edge, bags and sleeves catch it and drag it off.
February 11, 2025 at 7:35 pm #5202Deli_Owner_Queens
ParticipantOK, I did the tape thing after we closed. The open space between the scale and the register is about 20 inches wide and 16 deep, with the reader sitting just behind it on the left. That’s a lot smaller than I pictured.
February 12, 2025 at 7:58 am #5203GiftShop_Asheville
ParticipantThat’s normal. Before I committed to anything, I taped two sheets of poster board in that spot for a week and watched where things landed. Customers put their bags down on the left side, not in the middle where I expected. If I had gone with my guess, half the mat would have been covered all day.
Paper costs nothing and it tells you more than a tape measure does.
February 12, 2025 at 10:20 am #5204CounterMats Team
ModeratorClear measurements make this easy, and the advice above is good. Keep the scale on the bare counter, and measure the free space with every piece of equipment in its working spot.
Our standard printed sizes are 12 x 18, 16 x 20 and 18 x 24 in. Most counters take a mat between 18 and 30 inches deep, so the depth of the counter is rarely what limits you. The free space between the equipment usually is. For the space you taped, a 12 x 18 in mat turned sideways leaves a little room on each side and stays off the scale.
If the space has an odd shape, such as a notch around a reader stand, we quote a custom size or shape. Every printed order starts with a free digital proof within 1 business day, so you can check the layout against your measurements before it prints.
We cover the common equipment layouts here: https://countermats.com/pos-counter-mat-size/
CounterMats Team · Contact Us
February 12, 2025 at 11:05 am #5205Deli_Owner_Queens
ParticipantTurning it sideways is the part I didn’t think of. The paper mockup goes down tonight, and I’ll leave it there through the weekend rush to see where the bags land.
February 12, 2025 at 1:30 pm #5206BikeShop_Boise
ParticipantFollow-up question. My card reader is on a cord that runs back to the register. Should the cord go under the mat so it looks clean?
February 12, 2025 at 3:12 pm #5207CStore_Owner_Ohio
ParticipantI wouldn’t. A cord under the mat makes a ridge, and every customer who signs or sets a coffee down hits that ridge. Over time it wears a line into the mat right where the cord sits. Run cords behind the equipment or along the back edge of the counter and clip them down.
Also think about where the reader sits when a customer pulls it toward them. On a swivel stand, people turn it and drag it a few inches. If that swing lands on the mat, the stand base scrapes the same spot all day. Measure the swing, not just the parked position.
February 17, 2025 at 7:10 am #5208Deli_Owner_Queens
ParticipantUpdate for anyone who finds this later. The paper sat there four days, Saturday included. Bags land on the right, not on the left like in GiftShop’s store, so everybody’s counter really is different. I also moved the gum rack two inches toward the register, which gave me a cleaner rectangle.
Nothing rocks, the scale is on the bare counter, and my guys stopped complaining.
February 17, 2025 at 9:26 am #5209GiftShop_Asheville
ParticipantLove the update. Two inches of gum rack is a very deli solution. Good luck with it.
- AuthorPosts
- Log in or create an account to post. Anyone can read.