What should I check on a proof before I approve it?
Example thread · fictional members and dates What does this mean?
- This topic has 15 replies, 5 voices, and was last updated 1 year, 4 months ago by
CreditUnion_Ops_PA.
- AuthorPosts
- June 24, 2025 at 8:05 am #5315
FranchiseOps_Midwest
ParticipantWe’re about to get the proof for a new register mat across all 38 shops. Last rollout, a phone number went out with one wrong digit. Nobody caught it on the proof, and we lived with that mat for a year.
What do people actually check on a proof, and in what order? I want a routine, not a feeling.
June 24, 2025 at 9:20 am #5316Designer_PDX
ParticipantHere’s my order, and the order matters, because people stop checking once they find the first mistake.
- Text: read every word out loud, then read it backward word by word for typos
- Numbers: call the phone number, type the web address into a browser, scan any QR code
- Logo: the right version, the right colors, nothing stretched
- Edges: nothing important close to the trim line
- Size and orientation: the right dimensions, and the text facing the customer
- Version: the proof matches the final file, not last week’s draft
June 24, 2025 at 10:45 am #5317CreditUnion_Ops_PA
ParticipantAdd a compliance step if anything on the mat is regulated. At the credit union, any rate or product claim needs approved wording, and our compliance team reviews the proof itself, not the draft we sent. The draft and the proof can differ when a file gets resaved.
Get the sign-off in writing, with a name and a date. When questions come up later, that email is the only thing that counts.
We also check the small print at the bottom of the proof, like the equal housing logo or the insurance line. Those are the first things a designer shrinks to make room, and the first things an examiner notices.
June 24, 2025 at 12:10 pm #5318BikeShop_Boise
ParticipantNew shop owner here, about to do my first mat. What does “close to the trim line” mean? How close is too close?
June 24, 2025 at 1:30 pm #5319Designer_PDX
ParticipantThe printer cuts the mat from a bigger sheet, and the cut can drift a little. So there are two zones. Bleed is extra background that runs past the cut so you don’t get a white sliver at the edge. The safe zone is a margin inside the cut where nothing important goes.
A common rule is to keep text and logos at least half an inch inside the edge. On a mat, add more at the front edge, because hands and elbows rest there all day.
June 24, 2025 at 3:00 pm #5320FranchiseOps_Midwest
ParticipantThe version check would have saved us last time. The proof looked right, but it was built from the file before legal changed one line. Now the file name carries a version number, and the proof email has to name it. If a proof doesn’t say which version it was built from, we send it back before anyone reads a word.
June 24, 2025 at 4:20 pm #5321BikeShop_Boise
ParticipantHow do I judge color? My logo is a specific green, and on my laptop the proof looks a little blue.
June 25, 2025 at 8:40 am #5322Designer_PDX
ParticipantA screen is lit from behind, and a mat isn’t. A digital proof shows layout, text and placement well. It shows color only roughly. If your green matters, give the printer a color reference from a printed swatch book, not a screen value, and ask how they match it.
Never approve color from a phone screen. Phone brightness changes everything.
If color is critical, ask whether a physical proof is possible and what it adds to the schedule. For most small-shop logos, a close match is fine, and the digital proof is enough to check everything else.
June 25, 2025 at 10:00 am #5323CounterMats Team
ModeratorDesigner_PDX’s order of checks matches ours almost line for line, and CreditUnion_Ops_PA’s written sign-off is a habit worth copying.
Every printed order gets a free digital proof within 1 business day. Our proof page explains what a proof checks beyond the obvious, why a digital proof cannot catch everything (screen color is one of those limits), what to check when the proof arrives and why it pays to approve quickly once it’s right.
Printed mats ship 5 business days after proof approval, so the approval date sets the ship date. If you want changes, send all of them in one reply. The 5 business days count from the approved proof, so each extra round moves the ship date.
What to check on your proof: https://countermats.com/custom-counter-mat-proof/
CounterMats Team · Contact Us
June 25, 2025 at 11:30 am #5324CreditUnion_Ops_PA
ParticipantSending all changes in one reply is harder than it sounds when four people review. We collect comments in one shared document first, and one person sends them. Nobody emails the printer directly.
June 25, 2025 at 1:15 pm #5325FranchiseOps_Midwest
ParticipantSame here now. And if a design has store-specific parts, like a phone number per store, every variant gets its own check. We had one shared layout with 38 phone numbers. Checking the layout once isn’t checking the numbers.
For those, we print a list of every variant with the store number and phone number side by side and tick each one off against the proof. It’s boring, and it’s the only way we’ve found that works.
June 25, 2025 at 2:40 pm #5326BikeShop_Boise
ParticipantMy mat was going to say “Grand opening June 14”. Is it a mistake to print a date?
June 25, 2025 at 3:55 pm #5327Designer_PDX
ParticipantUsually, yes. A date makes the mat useless the day after. Opening dates also move, and then you have a counter full of wrong information. Print what stays true: the name, what you do, the web address. Put the date on a sign you can throw away, or on a window cling.
Same rule for prices. Anything that changes belongs somewhere cheaper to replace.
June 26, 2025 at 9:10 am #5328BikeShop_Boise
ParticipantTaking the date off. That would have been me, exactly. The opening already moved once, from May to June when the permit took longer, and I’d have a stack of mats with the wrong month on them.
June 26, 2025 at 10:45 am #5329FranchiseOps_Midwest
ParticipantOur routine from now on, for anyone who wants it. Two people check the proof separately. One reads every word out loud. One calls every phone number and types every web address. The person who wrote the text is never the only checker. Compliance signs off on the proof, not the draft. One person sends one reply with every change.
June 26, 2025 at 12:20 pm #5330CreditUnion_Ops_PA
ParticipantAdd a line for who has final say. When two reviewers disagree on the proof, someone has to decide that day, or the schedule slips while they debate. For us that’s the branch operations lead, and compliance can only veto, not redesign.
- AuthorPosts
- Log in or create an account to post. Anyone can read.