...

Will an insert mat for 8.5 x 11 sheets fit a shallow counter?

Example thread · fictional members and dates What does this mean?

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #5210
    Pharmacy_Mgr_Tampa
    Participant

    Our pickup window has a ledge, not really a counter. It’s 14 inches deep and about 3 feet wide, with a pen cup and a small sign holder on it already.

    I want a mat with a clear top that holds a regular letter-size sheet, so we can change the message every month: flu shots in the fall, vaccine reminders, the hours for the holidays. Will a mat that holds a full sheet even fit on a ledge that shallow? And will it look cluttered?

    #5211
    CreditUnion_Ops_PA
    Participant

    We use the same idea at our teller windows, and our ledges are close to yours, between 12 and 15 inches depending on the branch. A letter sheet is 11 inches tall, so in portrait it leaves you very little room front and back. Most of our branches run the sheet in landscape. That way the mat sits low and wide and doesn’t crowd the window.

    For us the bigger question was what goes on the sheet. Rate notices and certain disclosures have to stay posted, so compliance reviews every insert before it goes into a branch. If anything regulated goes on yours, I would ask whoever handles that for the pharmacy first.

    #5212
    Pharmacy_Mgr_Tampa
    Participant

    Landscape makes sense. Nothing regulated, just reminders and hours. But your point about review is a good one. Our owner will want to see every sheet anyway.

    #5213
    FrontOffice_Vegas
    Participant

    Hotel front desk here. We have insert mats at each check-in station with the Wi-Fi details and the restaurant hours. Two things I learned:

    First, the clear top shows fingerprints. On a 24-hour desk, the night auditor wipes them twice a shift, so plan for that.

    Second, print the insert on matte paper. Glossy paper under a clear cover gives a glare from the ceiling lights, and guests can’t read it from where they stand.

    #5214
    CStore_Owner_Ohio
    Participant

    The pen cup is your real problem, not the mat. If the pen cup sits on top of the clear cover, the bottom of the cup wears a ring into it in a couple of months. Move the pen cup off the mat or put it on a little felt pad.

    Same goes for that sign holder. Two signs and a mat on a 14 inch ledge is a lot to read. I would retire the sign holder and let the mat do the job.

    At my stores, the rule is one message per spot. When the register had a sign, a sticker and a mat all saying different things, customers read none of them. When we cut it down to the mat alone, people started asking about whatever was on it. A pickup window is the same, maybe more so, because patients are usually tired and in a hurry.

    #5215
    Pharmacy_Mgr_Tampa
    Participant

    Retiring the sign holder is a hard sell, it was the owner’s idea. I’ll show him a mockup with and without and let him decide. I printed a sheet in landscape and put it on the ledge with a piece of cardboard behind it. It fits with about an inch and a half to spare front and back. Tight, but it works.

    #5216
    CounterMats Team
    Moderator

    Thanks for measuring the ledge first. That answers most of the question already.

    Our Stock Interchangeable mat comes in two stock sizes. The 10.5 x 13 in mat holds an 8.5 x 11 insert, and the 13 x 19 in mat holds an 11 x 17 insert. For a ledge as shallow as yours, the 10.5 x 13 in mat in landscape is the one that fits. If neither stock size fits a window, we also make it in a custom size. The current price for each size is on the product page linked below.

    Stock mats ship the same business day on orders placed by 1 pm ET. The minimum order is 50 mats, so with only a few windows, the rest become spares for when a cover gets scratched.

    Product details and insert sizes: https://countermats.com/product/stock-interchangeable/

    CounterMats Team · Contact Us

    #5217
    CreditUnion_Ops_PA
    Participant

    Good tip on spares. We swap a cover every so often when one gets scratched from coins sliding across it. Having a few on the shelf at each branch saves a trip.

    #5218
    FrontOffice_Vegas
    Participant

    A tip for Pharmacy_Mgr_Tampa from experience: write the month on the back of every insert in pencil. When you have more than one window, it’s easy to leave a holiday notice in one of them until February. I’ve done it. Twice.

    #5219
    Pharmacy_Mgr_Tampa
    Participant

    Ha, I can see that happening to us. Pencil on the back goes on my checklist.

    I talked with the owner. He wants the mat at the pickup window, one at the drive-through, and one at the consultation counter where patients wait for the pharmacist. The sign holder stays for now. We’ll see how long that lasts.

    #5220
    CStore_Owner_Ohio
    Participant

    It’ll last until someone knocks it into the window. Give it a month.

    #5221
    CreditUnion_Ops_PA
    Participant

    For the consultation counter, think about what patients can read upside down. At our member service desks, the member sits across from the staff member, so the insert faces the member. If your pharmacist works on the same side as the patient, the sheet faces the other way. It sounds obvious, but we got it wrong at two branches.

    #5222
    Pharmacy_Mgr_Tampa
    Participant

    Good catch. Our pharmacist stands across the counter from the patient, so the insert faces the patient. I’m glad I asked here first. The ledge question turned into a whole plan, and it’s a better one than I started with.

    #5223
    FrontOffice_Vegas
    Participant

    Last thing from me. Keep a folder with the file for every insert you print, named by month. Next year, when flu season comes back, you open last October’s file, change the dates and print. Our desk saves hours a year that way, and nobody has to remember how the old one looked.

Viewing 14 posts - 1 through 14 (of 14 total)
  • Log in or create an account to post. Anyone can read.

Log in

Forgot your password?

Join the Counter Mat Forum

Everyone sees this. A role works well instead of your name, for example CStore_Owner_Ohio.

Members, discussions and dates in threads marked Example thread are fictional. CounterMats wrote them to explain common counter mat questions in plain language.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.