Forum Replies Created
- AuthorPosts
- September 10, 2026 at 11:20 am in reply to: Do stock insert mats ship faster than printed ones? #5750
CStore_Owner_Ohio
ParticipantClean plan. Keep a few blank mats in the branch office too. Somebody always spills coffee on one.
CStore_Owner_Ohio
ParticipantPut the effective date in small print in the corner of each sheet, in the same spot every time. When my district guy visits, he checks the corner first. Saves arguments about whether this week’s deal is up.
CStore_Owner_Ohio
ParticipantAgree on cardstock. Also, lay the mat flat for a day before you slide the first sheet in. A mat that shipped rolled will push the paper up at the edges until it relaxes.
Third thing: keep the sheet a hair smaller than the pocket. If your printer adds a margin or you trim the sheet slightly, it slides in without catching. A sheet cut exactly to the pocket size buckles in the middle on a warm day, and then the clear top shows a bubble right over the rate you most want people to read.
September 8, 2026 at 11:30 am in reply to: Do stock insert mats ship faster than printed ones? #5738CStore_Owner_Ohio
ParticipantSame at my two stores. Insert mats by the register with the weekly deals. The mat stays, the paper changes every Monday. The night clerk prints the sheets on Sunday, so Monday’s shift just slides them in.
Size question for you: what paper size are your rate sheets? Ours are letter size. The bigger pocket that holds tabloid paper would cover my whole counter.
CStore_Owner_Ohio
ParticipantI’m stealing the two-layer idea. Required notices along the bottom, one message up top. My current mat has eleven different things on it. I just counted.
CStore_Owner_Ohio
ParticipantAlso count what covers the mat. My card reader, the lottery display and the gum rack eat a third of mine. Half the text on my old mat was under equipment, and I paid to print every word of it.
Before you lay anything out, put the equipment on a blank sheet of paper the size of the mat and trace around it. Whatever’s left is the space you actually have to work with.
CStore_Owner_Ohio
ParticipantHow small is small? I don’t want an inspector telling me it’s unreadable, and I don’t want customers squinting at it either.
CStore_Owner_Ohio
ParticipantFrom the store side, some of that text isn’t optional. I have to post certain notices near the register. If I put them on the mat, they’re off the wall. So for me it’s not “cut everything”. It’s “decide what’s required and make the rest small”.
I’d rather have the notice on the mat, where people actually look, than on a wall behind the cigarettes where nobody does. But I need to know it still counts as posted.
CStore_Owner_Ohio
ParticipantDecision made. Insert mats with our logo printed around the pocket, letter-size inserts, card stock, matte. The first insert goes in for May. The taped sign goes in the trash.
CStore_Owner_Ohio
ParticipantThe free sheet part I like. What size do reps usually send?
CStore_Owner_Ohio
ParticipantFifty covers both stores many times over. I’d put the extras at the coffee station and the lottery counter, which gives me two more spots for the monthly deal.
CStore_Owner_Ohio
ParticipantIs there ever a case for printing a new mat each time?
CStore_Owner_Ohio
ParticipantThe distributor rep did offer printed sheets once. I had nowhere to put them, so they went in a drawer. They’re probably still there, under the spare receipt rolls.
February 19, 2026 at 10:35 am in reply to: Do setup fees and plate charges still show up on mat quotes? #5344CStore_Owner_Ohio
ParticipantAnd the cheapest way to avoid file fixes is to send a clean file. My nephew does our artwork, and he asks the printer for their file specs before he starts. He keeps a folder with the specs from every print job we’ve done, so the next one starts from the right size and resolution.
February 18, 2026 at 2:30 pm in reply to: Do setup fees and plate charges still show up on mat quotes? #5341CStore_Owner_Ohio
ParticipantFor a small operator, look at the cost over a year, not the first invoice. I replace a mat or two a year from burns and box cutters. Burns are the big one, from the coffee pot at store two. If a reprint carries the same extra charges as the first run, that adds up for two stores.
So my question to any printer is simple: what does the second run cost if nothing changes but the quantity? The answer tells me more than the first quote does.
February 17, 2026 at 4:00 pm in reply to: Do setup fees and plate charges still show up on mat quotes? #5336CStore_Owner_Ohio
ParticipantFreight is the one that gets me. A quote shipped to my office isn’t a quote shipped to two stores in different towns. Ask for the shipping to each real address.
February 17, 2026 at 11:35 am in reply to: Do setup fees and plate charges still show up on mat quotes? #5333CStore_Owner_Ohio
ParticipantI don’t care what the lines are called. I ask for one number: total per mat, delivered to my stores. If the total is fair, the lines can say whatever they want.
I learned that with receipt paper and bags. Every vendor names their charges differently, and comparing line by line made my head spin. The delivered total is the only number I can compare across them.
January 15, 2026 at 1:30 pm in reply to: Can a beverage brand put mats in stores it doesn’t own? #5485CStore_Owner_Ohio
ParticipantAnd send a rep to ask before swapping it. A new mat that shows up without a word gets the same treatment as one that doesn’t fit. Same when the program ends. Tell me, or the mat stays down long after anyone at the brand remembers it.
January 14, 2026 at 3:30 pm in reply to: Can a beverage brand put mats in stores it doesn’t own? #5481CStore_Owner_Ohio
ParticipantHours and a deal. Or let me pick from four or five lines: “Ask about our coffee club”, “We have ice”, “ATM inside”. Things I’d say anyway. Keep it to something a customer can act on at the register. A printed card from the rep is fine.
January 13, 2026 at 4:00 pm in reply to: Can a beverage brand put mats in stores it doesn’t own? #5475CStore_Owner_Ohio
ParticipantOn the share of the mat, my rule is that the brand gets about two thirds and the store gets a third. If the store’s part is just a blank box, I won’t fill it in. Print something useful there, like a slot for my weekly deal or a line I choose from a short list.
And keep the design quiet. My counter already has the lottery terminal, the tip jar and the gum display. A loud mat on top of all that just looks like clutter.
January 13, 2026 at 10:35 am in reply to: Can a beverage brand put mats in stores it doesn’t own? #5471CStore_Owner_Ohio
ParticipantFree gets you a conversation, not a spot. I say yes when the mat does something for me. Leave room for my own message, like my hours or a deal at my store, and I’ll keep it.
It goes in the dumpster if it covers the lottery terminal, doesn’t fit the counter or advertises a product I don’t carry.
CStore_Owner_Ohio
ParticipantWelcome to monthly offers. Pick January now, before the holidays eat your brain.
CStore_Owner_Ohio
ParticipantEvery month or so. My regulars come in twice a day. A tourist store could probably leave the same offer longer.
I also made sure the cashiers knew about the test, but I told them not to mention it to customers. I wanted to know what the counter did by itself. If your staff pushes the offer at the same time, you’re measuring them, not the mat.
CStore_Owner_Ohio
ParticipantI tested it at my two stores, because I had the same argument with myself. One store got the offer on the counter, the other didn’t, same price and same product. I watched the add-on count for a month.
The store with the offer sold noticeably more of the add-on in the first couple of weeks. Then it faded once regulars had seen it a dozen times. When I changed the offer, it picked back up.
So my answer: yes, but the message has to change.
October 9, 2025 at 9:10 am in reply to: Is a clear mat you slide paper under worth it for a menu or price list? #5312CStore_Owner_Ohio
ParticipantSnug is right. A loose sheet migrates toward the customer every time someone slides a bag across. Trim it so it fits inside the edge with no gap, and it stops moving.
October 8, 2025 at 11:45 am in reply to: Is a clear mat you slide paper under worth it for a menu or price list? #5308CStore_Owner_Ohio
ParticipantFor two stores with a third coming, spares make sense to me. A scratched cover gets swapped in a minute. For one deli, splitting with neighbors is the realistic way to do it. Keep the spares flat in the back room, never rolled. A rolled mat takes days to lie flat again on a cold counter.
October 7, 2025 at 3:20 pm in reply to: Is a clear mat you slide paper under worth it for a menu or price list? #5304CStore_Owner_Ohio
ParticipantLetter size reads fine at arm’s length if the type is big and you keep it to about twenty items. A full menu needs tabloid size. For egg and coffee prices, letter size is plenty.
Put the prices people ask about most at the top, nearest the customer. On my specials sheet that’s coffee, the hot dog deal and cigarettes. Everything else can be smaller further down.
October 7, 2025 at 8:55 am in reply to: Is a clear mat you slide paper under worth it for a menu or price list? #5300CStore_Owner_Ohio
ParticipantWe do it at one of my two stores with the weekly specials. It works, with two problems. Liquid finds its way under the edges, from spilled coffee mostly, and plain printer paper goes wavy. Keep the sheet an inch inside the edge of the mat on every side, and print on heavier paper.
When it does get wet underneath, lift the mat, dry the counter and the underside, and put in a fresh sheet. If you leave it, the paper sticks to the counter and tears when you finally lift the mat.
The second problem is people. Someone always tucks a business card or a flyer under there. Check it every morning.
CStore_Owner_Ohio
ParticipantThat matches my two stores. A spare in the back room has saved us more than once when a mat got a burn mark from a hot coffee pot.
August 12, 2025 at 11:15 am in reply to: What does a custom printed mat cost per piece at 100? #5256CStore_Owner_Ohio
ParticipantSize moves the price more than anything else I’ve seen. Small mats and large mats are different products as far as cost goes. Decide the size from the counter first, then compare prices for that exact size. Comparing a small mat quote to a large one tells you nothing.
Same with material. A thin vinyl mat and a heavy rubber one aren’t the same product, even at the same size. Write the size and the material on top of every quote request, so every printer prices the same thing.
- AuthorPosts