Why is there a minimum order, and can a small shop order just a few?
Example thread · fictional members and dates What does this mean?
- This topic has 13 replies, 5 voices, and was last updated 1 year ago by
BikeShop_Boise.
- AuthorPosts
- October 21, 2025 at 7:40 pm #5269
BikeShop_Boise
ParticipantThe shop is open, and it’s going well. Now I want a printed mat at the register and one at the repair counter. Two mats. Maybe three if I count the one for the event tent.
The quote forms I’ve looked at start at a quantity way above what I need. Why do printed mats have a minimum at all? And is there any way for a shop my size to get just a few?
October 21, 2025 at 8:55 pm #5270PromoBuyer_Chicago
ParticipantMinimums are normal across almost all custom printing. The work to set up a job is about the same for 2 pieces or 200: preparing the file, checking the proof, matching the color, setting up the press and running test pieces until the color is right. Spread across 2 mats, that setup makes each one very expensive. Spread across a full run, it almost disappears.
So the minimum isn’t a printer being difficult. It’s the point where the job makes sense for both sides.
There’s also waste. The first pieces off a press run are often test pieces that get thrown out while the color settles. On a long run, nobody notices. On a run of two, the test pieces can outnumber the real ones. Digital printing has made short runs easier for paper and stickers, but a mat is a heavier product with more steps, so the math is different.
October 22, 2025 at 8:15 am #5271GiftShop_Asheville
ParticipantI had the same reaction when I started. Two registers and a gift-wrap station, and nobody prints three of anything.
What changed my thinking: I stopped asking how many I need today and asked how many I’ll use over a couple of years. Mats get scratched, a customer sets a hot drink on one, a promotion changes. Spares on a shelf aren’t wasted.
October 22, 2025 at 9:02 am #5272BikeShop_Boise
ParticipantThat makes sense, but storing a big stack of mats in a bike shop where I already can’t find anything sounds rough. The back room is wheels, tubes, boxes of bikes I haven’t built yet and one chair. Every square foot counts.
October 22, 2025 at 10:40 am #5273Deli_Owner_Queens
ParticipantThey lie flat. A stack of mats takes up about as much room as a case of paper cups. Put it under a shelf or on top of a cabinet and forget about it until you need one.
Here’s another idea. Talk to the shops on your block about going in together, everybody’s own logo in one run, and split the box at the end. Ask the printer first whether they allow different designs in one run.
October 22, 2025 at 12:10 pm #5274PromoBuyer_Chicago
ParticipantGood point on asking first. Some printers count a minimum per design, and some count it per order. That one detail decides whether a group order works.
If you do go in with other shops, put one person in charge of the artwork deadline and the payment split. Group orders fall apart when four owners each wait for the other three. I’ve seen it with business association banners more than once. Agree on the date first, then the designs.
October 22, 2025 at 2:30 pm #5275CounterMats Team
ModeratorPromoBuyer_Chicago and GiftShop_Asheville already explain the reasons well, and we agree with both of them on why minimums exist.
The minimum order is 50 mats. That applies to every product, stock and printed. The per-mat price on printed mats drops as the quantity goes up, so a run of 50 gets its own price on the quote. We charge no setup fees.
For a shop with a few counters, stock mats can keep the cost down. Our Stock Interchangeable mat in 10.5 x 13 in holds an 8.5 x 11 insert, so you change the message by printing a new sheet instead of a new mat. Current price: https://countermats.com/product/stock-interchangeable/
More on how minimums work: https://countermats.com/counter-mat-minimum-order-quantity/
CounterMats Team · Contact Us
October 22, 2025 at 6:25 pm #5276BikeShop_Boise
ParticipantOK, the insert idea changes things for me. I could put my logo on the sheet, print it on my own printer, and change it for the spring tune-up special.
October 23, 2025 at 8:44 am #5277GiftShop_Asheville
ParticipantThat’s what I’d do in your spot. Print the insert at a copy shop on heavier paper if your home printer streaks. And as Deli_Owner_Queens said, a stack stores flat.
Think about where else a mat could earn its spot, too. In my shop, there’s one at each register, one at the gift-wrap station with the wrapping prices, and one on the table by the door with the event calendar. That’s four spots I didn’t count at first. A bike shop probably has a few: the repair intake counter, a workbench where customers wait, maybe the rental desk in summer.
October 23, 2025 at 9:20 am #5278Deli_Owner_Queens
ParticipantAlso, spares make good thank-yous. Give a couple to whoever sponsors your group ride or to the shop next door. Everybody has a coffee maker that needs something under it.
October 23, 2025 at 11:35 am #5279PromoBuyer_Chicago
ParticipantBefore you decide on any quote, look hard at the total, not the per-piece. For a small shop, the total is what hits the bank account. Ask for it in writing, shipping included, so you can compare apples to apples. And ask how long the quote is good for, so you can plan the timing around your slow season.
October 23, 2025 at 8:10 pm #5280BikeShop_Boise
ParticipantThat’s my plan, then. Insert mats at the register, the repair counter and the event tent, the rest on the shelf as spares. I’m also asking the coffee shop and the outdoor store next door if they want to go in together on a printed run next year.
October 24, 2025 at 8:30 am #5281GiftShop_Asheville
ParticipantLook at you, organizing the block. Six months ago you were asking what bleed meant.
October 24, 2025 at 9:05 am #5282BikeShop_Boise
ParticipantLearning retail one question at a time. Thanks, everyone.
- AuthorPosts
- Log in or create an account to post. Anyone can read.