...

Forum Replies Created

Viewing 30 posts - 1 through 30 (of 30 total)
  • Author
    Posts
  • in reply to: Shipping mats to stores in different states: one box or many? #5764
    CreditUnion_Ops_PA
    Participant

    One more risk. If the stores are in different states, check whether any of them have rules about what a promo can say. Some products have state-level advertising rules. That’s not a shipping question, but it’s cheaper to find out before the mats go out than after.

    in reply to: Shipping mats to stores in different states: one box or many? #5761
    CreditUnion_Ops_PA
    Participant

    Ask for the tracking numbers in one spreadsheet, matched to store numbers. When a branch says “we never got it,” I search the sheet instead of a carrier website.

    Nine times out of ten the box was delivered and signed for by someone on another shift. The tracking sheet shows the delivery time, the branch checks who was on, and the box turns up behind the coffee machine. Without the sheet, that conversation takes a day of emails.

    in reply to: Shipping mats to stores in different states: one box or many? #5756
    CreditUnion_Ops_PA
    Participant

    Different setup but same lesson. We ship to nine branches in one state, and even that goes wrong when the box isn’t labeled for a person. Ours go to “Branch Operations, attention: branch manager name.” Boxes addressed only to the branch sit in the mailroom.

    Also ask whether each store’s box is labeled with the store number on the outside. When a rep has to sort boxes, a number on the carton saves an hour.

    in reply to: Do stock insert mats ship faster than printed ones? #5751
    CreditUnion_Ops_PA
    Participant

    Spares added. Compliance meets Thursday.

    in reply to: Do stock insert mats ship faster than printed ones? #5749
    CreditUnion_Ops_PA
    Participant

    Here’s the plan going to our compliance team:

    • Letter-size insert mats at every teller station
    • Rate sheets on matte cardstock, effective date in the corner
    • Branch managers swap sheets the day the rate changes and confirm by a one-line email
    • Old sheets come back for shredding
    • Glare check at each branch before rollout, matte paper if needed
    • Dated master file of every version
    in reply to: Do stock insert mats ship faster than printed ones? #5746
    CreditUnion_Ops_PA
    Participant

    They will. They’ll also want to know who swaps the sheets and how fast. I’m thinking a rate change email goes to each branch manager with the PDF, and the old sheets come back to the branch office for shredding.

    The other question they’ll ask is what happens if a teller station shows an old rate for a morning. Right now the answer is “it can’t, because the rates are on a lobby frame we swap ourselves.” With 45 mats, the risk goes up. I may ask each branch manager to confirm by email the day they swap.

    in reply to: Do stock insert mats ship faster than printed ones? #5744
    CreditUnion_Ops_PA
    Participant

    That answers it. Nine branches with five teller stations each comes to 45, plus spares, so the quantity works for us.

    in reply to: Do stock insert mats ship faster than printed ones? #5742
    CreditUnion_Ops_PA
    Participant

    Very helpful. Back to timing, since we’d like them out before the next rate change. Is “stock ships fast” true for any quantity, or only small ones?

    in reply to: Do stock insert mats ship faster than printed ones? #5739
    CreditUnion_Ops_PA
    Participant

    Letter size. Our templates are all 8.5 x 11 for the lobby frames already, so that’s what compliance approves.

    Pharmacy_Mgr_Tampa, fair point on our own clock. Compliance turns rate sheets around in about three days. Rates have moved twice in one week before, which is exactly why printed mats are off the table.

    in reply to: Are mats at a teller line worth it for a credit union? #5782
    CreditUnion_Ops_PA
    Participant

    I’ll pilot it at two branches with different traffic, one busy downtown and one small suburban, for six weeks. Then the managers decide with numbers instead of opinions.

    Plan for the pilot:

    • Mat on the member side only, teller items stay off it
    • Smooth surface for signing
    • Fixed brand message printed, rates on an insert
    • Mat-only QR code, tracked by the web team
    • Compliance signs off on everything first
    in reply to: Are mats at a teller line worth it for a credit union? #5780
    CreditUnion_Ops_PA
    Participant

    We can do something similar. A QR code that only appears on the mats, going to a page the web team tracks. Or a “mention this at the teller line” offer, if compliance signs off on one.

    in reply to: Are mats at a teller line worth it for a credit union? #5778
    CreditUnion_Ops_PA
    Participant

    The insert option solves the rate problem. Printed brand mat on most stations, insert mats where marketing wants rates.

    in reply to: Are mats at a teller line worth it for a credit union? #5774
    CreditUnion_Ops_PA
    Participant

    Good point. Members sign and fill out slips right there. Smooth surface noted.

    Second question is the message. Marketing wants loan rates on it. Our compliance team will have opinions about any rate that appears in print, and rates change. I don’t want to reprint mats every time a rate moves.

    in reply to: Are mats at a teller line worth it for a credit union? #5771
    CreditUnion_Ops_PA
    Participant

    That’s my worry exactly. Teller stations are small. Deposit slips, the pen, the cash tray, the signature pad. Where does the mat even go?

    Our stations are about 36 inches wide at the counter. The member side is maybe 14 inches deep before the glass partition. Most of that space gets used for passing things back and forth, so whatever goes there has to stay flat and out of the way.

    CreditUnion_Ops_PA
    Participant

    That’s close to what we did. The chargeback through an existing statement is the part that keeps people from arguing, because nobody gets a surprise invoice. Tell the franchisees the amount before the run, not after. Ours took it much better when they saw the number on the agenda of the regional call first.

    CreditUnion_Ops_PA
    Participant

    Count the registers in writing, store by store. Our count was off by two because a branch had added a drive-up window nobody told operations about.

    CreditUnion_Ops_PA
    Participant

    Then that’s your answer for shipping. We didn’t have that, so ours went direct, and two branches needed a second delivery because the address on file was the old one.

    CreditUnion_Ops_PA
    Participant

    Packing slips matter more than people think. Our branch staff open a box, see a mat and put it out. If a box goes to the wrong branch, nobody notices until the regional manager visits. Ask for the branch number on the outside of every carton.

    CreditUnion_Ops_PA
    Participant

    We did nine branches, not forty, but we had the same split. Each branch has its own cost center. What worked for us was one PO from operations with a line per branch on the invoice. Finance then moved each line to the branch cost center. Ask the printer up front whether they can break out the invoice by location. That one question solved it for us.

    CreditUnion_Ops_PA
    Participant

    Please do. What a compliance reviewer actually changes is the most useful thing anyone in a regulated business can share. Post what they leave alone, too. Knowing what passed review helps the next pharmacy just as much.

    CreditUnion_Ops_PA
    Participant

    Beside. A pad on top of a mat wobbles, and patients press hard when they sign. Measure around the pad and keep the mat flat and clear of cables.

    On the hours question, we moved our hours to the insert too. They changed twice last year, and a printed mat with the wrong hours is worse than no mat.

    CreditUnion_Ops_PA
    Participant

    We do something similar at the branches. Fixed information is printed, and the promotion is an insert that compliance approves each time. Keep a log of which insert was out on which dates. If anyone asks later what a customer saw, you can answer.

    CreditUnion_Ops_PA
    Participant

    Then a short list of what generally seems safe: hours, the refill line, the pharmacy name, a general “ask us about” message. What I’d run past compliance first: anything naming a medication, anything that looks like a drug manufacturer’s ad and anything about insurance.

    CreditUnion_Ops_PA
    Participant

    Teller lines have the same tension, so here’s how we handle it. Anything with personal information stays off printed surfaces. Every printed word goes through our compliance team before it goes to the printer.

    For a pharmacy, the privacy rules are their own world. Ask your compliance contact, or your state board of pharmacy if you don’t have one. I wouldn’t guess at what’s allowed from a forum thread, including this one.

    What I can share is the process. We write the text, compliance marks it up, we fix it, and compliance sees the final layout once more before anything is printed. It adds a week, and it has saved us from reprinting more than once.

    in reply to: What should I check on a proof before I approve it? #5330
    CreditUnion_Ops_PA
    Participant

    Add a line for who has final say. When two reviewers disagree on the proof, someone has to decide that day, or the schedule slips while they debate. For us that’s the branch operations lead, and compliance can only veto, not redesign.

    in reply to: What should I check on a proof before I approve it? #5324
    CreditUnion_Ops_PA
    Participant

    Sending all changes in one reply is harder than it sounds when four people review. We collect comments in one shared document first, and one person sends them. Nobody emails the printer directly.

    in reply to: What should I check on a proof before I approve it? #5317
    CreditUnion_Ops_PA
    Participant

    Add a compliance step if anything on the mat is regulated. At the credit union, any rate or product claim needs approved wording, and our compliance team reviews the proof itself, not the draft we sent. The draft and the proof can differ when a file gets resaved.

    Get the sign-off in writing, with a name and a date. When questions come up later, that email is the only thing that counts.

    We also check the small print at the bottom of the proof, like the equal housing logo or the insurance line. Those are the first things a designer shrinks to make room, and the first things an examiner notices.

    CreditUnion_Ops_PA
    Participant

    For the consultation counter, think about what patients can read upside down. At our member service desks, the member sits across from the staff member, so the insert faces the member. If your pharmacist works on the same side as the patient, the sheet faces the other way. It sounds obvious, but we got it wrong at two branches.

    CreditUnion_Ops_PA
    Participant

    Good tip on spares. We swap a cover every so often when one gets scratched from coins sliding across it. Having a few on the shelf at each branch saves a trip.

    CreditUnion_Ops_PA
    Participant

    We use the same idea at our teller windows, and our ledges are close to yours, between 12 and 15 inches depending on the branch. A letter sheet is 11 inches tall, so in portrait it leaves you very little room front and back. Most of our branches run the sheet in landscape. That way the mat sits low and wide and doesn’t crowd the window.

    For us the bigger question was what goes on the sheet. Rate notices and certain disclosures have to stay posted, so compliance reviews every insert before it goes into a branch. If anything regulated goes on yours, I would ask whoever handles that for the pharmacy first.

Viewing 30 posts - 1 through 30 (of 30 total)

Members, discussions and dates in threads marked Example thread are fictional. CounterMats wrote them to explain common counter mat questions in plain language.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.