Forum Replies Created
-
AuthorPosts
-
Designer_PDXParticipantUsually, yes. A date makes the mat useless the day after. Opening dates also move, and then you have a counter full of wrong information. Print what stays true: the name, what you do, the web address. Put the date on a sign you can throw away, or on a window cling.
Same rule for prices. Anything that changes belongs somewhere cheaper to replace.
Designer_PDXParticipantA screen is lit from behind, and a mat isn’t. A digital proof shows layout, text and placement well. It shows color only roughly. If your green matters, give the printer a color reference from a printed swatch book, not a screen value, and ask how they match it.
Never approve color from a phone screen. Phone brightness changes everything.
If color is critical, ask whether a physical proof is possible and what it adds to the schedule. For most small-shop logos, a close match is fine, and the digital proof is enough to check everything else.
Designer_PDXParticipantThe printer cuts the mat from a bigger sheet, and the cut can drift a little. So there are two zones. Bleed is extra background that runs past the cut so you don’t get a white sliver at the edge. The safe zone is a margin inside the cut where nothing important goes.
A common rule is to keep text and logos at least half an inch inside the edge. On a mat, add more at the front edge, because hands and elbows rest there all day.
Designer_PDXParticipantHere’s my order, and the order matters, because people stop checking once they find the first mistake.
- Text: read every word out loud, then read it backward word by word for typos
- Numbers: call the phone number, type the web address into a browser, scan any QR code
- Logo: the right version, the right colors, nothing stretched
- Edges: nothing important close to the trim line
- Size and orientation: the right dimensions, and the text facing the customer
- Version: the proof matches the final file, not last week’s draft
May 22, 2025 at 4:00 pm in reply to: How do you measure a counter with a lip or a rounded front edge? #5437
Designer_PDXParticipantGood. With the seam noted, the counter is fully described. Keep the template rolled up somewhere safe, because the next mat will need the same measurements and the counter won’t get any more square.
May 21, 2025 at 2:45 pm in reply to: How do you measure a counter with a lip or a rounded front edge? #5433
Designer_PDXParticipantWrite it all on one sketch: counter outline, lip, register footprint, where the curve starts and which edge faces the customer. Put every number on it and photograph it next to the counter with the tape measure in the shot. A printer can work from that without guessing, and you’ll have it the next time you need a mat.
Mark the customer side clearly. I’ve seen a design come back upside down from the shopper’s point of view because nobody wrote down which way people stand.
May 20, 2025 at 3:30 pm in reply to: How do you measure a counter with a lip or a rounded front edge? #5428
Designer_PDXParticipantOn the rounded end you have two choices. Stop the mat square, just before the curve starts, or have it cut to follow the curve.
Square is simpler and usually cheaper, because it’s a standard rectangle. A curved end looks built in, but it’s a custom shape, and your template has to be accurate. If the curve area holds something anyway, like a display or a plant, square is the easy answer.
May 20, 2025 at 11:40 am in reply to: How do you measure a counter with a lip or a rounded front edge? #5425
Designer_PDXParticipantThen leave clearance. A mat cut to the exact inside measurement rides up against the lip and starts to curl at the edge within a few weeks. I tell clients to take about a quarter inch off every side that touches a lip or a wall.
For the rounded end, skip the math and make a paper template. Tape a few sheets of kraft paper together, lay them on the counter, press the paper into the curve and trace it with a pencil. Cut along the line, put it back on the counter and trim until it sits flat. The template becomes your measurement.
Designer_PDXParticipantNice work. Save all of it in one folder: the original file, the outlined version and a note with the color numbers. The next time you need a sign, a shirt or a sticker, you hand over that folder and skip this whole conversation.
Designer_PDXParticipantYou did. One last tip: ask him to save a version with the text turned into outlines. If the file has live text and the printer doesn’t have the same font, the computer swaps in a different one.
Designer_PDXParticipantBleed is extra artwork past the edge of the mat. Cutting is never perfectly precise, so if your background color stops exactly at the edge, a tiny white line can show on one side after the cut. With bleed, the color runs a little past the cut line and the cut lands inside it.
The opposite is the safe zone. Keep your logo and text a bit inside the edge so nothing important gets trimmed. On a counter where the edge takes wear, that matters even more.
Designer_PDXParticipantRight. For logos, I give clients the color as a Pantone number and as CMYK values. The printer matches whichever they print with. And always judge color on a printed proof or in daylight, never on a phone at night with the brightness turned down.
Designer_PDXParticipantThen a designer redraws it as a vector. For a simple logo, it’s a small job. Don’t let anyone just run your PNG through an automatic converter. Those tools turn smooth curves into lumpy ones, and you notice it the moment the logo is big.
If the mat uses a photo instead of a logo, the rule is different. A photo stays pixels, so it needs enough of them: 300 pixels per inch at the final printed size is the usual target.
Designer_PDXParticipantWelcome to the club. Most of my small-business clients start exactly where you are.
Short answer: a PNG is usually not enough. A website PNG is made for a screen, often around 500 to 1,000 pixels wide. On a mat, it gets stretched to a much bigger size and the edges turn soft and blocky.
What a printer wants is a vector file. That’s a file where the logo is made of shapes, not pixels, so it stays sharp at any size. The usual formats are AI, EPS, SVG or a PDF saved from the design program. Ask your friend for the original file. If they made it in a design program, they have it.
A quick way to tell what you have: zoom in on the logo as far as your screen goes. If the edges turn into little squares, it’s pixels. If the edges stay smooth no matter how far you zoom, it’s a vector.
-
AuthorPosts