Forum Replies Created
- AuthorPosts
- August 27, 2026 at 11:20 am in reply to: What do I put in a quote request so I get a real number back? #5735
EventMktg_SanJose
ParticipantCrate, flat. Adding it. First time I’ve sent a request with no ASAP in it.
August 27, 2026 at 9:30 am in reply to: What do I put in a quote request so I get a real number back? #5733EventMktg_SanJose
ParticipantHere’s what my request looks like now:
- Size: 18 x 24 in for booth counters, plus the reception desk measurement
- Quantity: total for six shows, office and spares
- Use: trade show counters, packed and shipped between shows
- Artwork: final vector file attached
- Ship-to: our office, one address, zip code included
- In-hands date: two weeks before the first show
- Proof approver: me, with a backup name
August 26, 2026 at 1:40 pm in reply to: What do I put in a quote request so I get a real number back? #5729EventMktg_SanJose
ParticipantSame issue at first glance for me, but we do six shows a year and have an office. I think we’d use them, as long as one design works everywhere. That’s a question I wouldn’t have asked before this thread.
August 25, 2026 at 4:30 pm in reply to: What do I put in a quote request so I get a real number back? #5724EventMktg_SanJose
ParticipantSame problem at a booth. The counter is one size, the space for the mat is another.
August 25, 2026 at 12:05 pm in reply to: What do I put in a quote request so I get a real number back? #5721EventMktg_SanJose
Participant“Not ASAP” made me laugh. I write ASAP on everything.
EventMktg_SanJose
ParticipantHere’s what goes to my boss:
- Mat around 18 x 24 in the middle of the table, near the front edge
- Logo, one-line offer, big QR code near the visitor’s edge
- QR goes to a page we can update per show
- Mat-only QR so we can count scans
- Packed flat in the booth crate
- Extras for the lobby, sales office and reps
EventMktg_SanJose
ParticipantA redirect we can update. The web team does that already for printed ads.
How do I tell my boss if it worked?
EventMktg_SanJose
ParticipantSix shows alone wouldn’t use that many, but we also have a lobby, a sales office and a customer event every year. And sales reps who’d take one to their own regional events. It works if the design isn’t tied to one show.
EventMktg_SanJose
ParticipantHa, our brochures slide every show. What size? The table is 72 x 30 and the tablet stand takes a corner.
EventMktg_SanJose
ParticipantWe already have the tablet for signups. Wouldn’t a QR code compete with it?
February 19, 2026 at 12:00 pm in reply to: Do setup fees and plate charges still show up on mat quotes? #5345EventMktg_SanJose
ParticipantAsking for the specs first is underrated. It turns a file fix into a non-event.
February 18, 2026 at 4:10 pm in reply to: Do setup fees and plate charges still show up on mat quotes? #5342EventMktg_SanJose
ParticipantSame with trade show mats. We reuse the base design and change the show name. If the cutting setup comes back every time, the shape costs more than the print by the third show.
February 18, 2026 at 11:40 am in reply to: Do setup fees and plate charges still show up on mat quotes? #5339EventMktg_SanJose
ParticipantOn any quote, ask how many proof rounds are included. One free proof and a charge for every round after that is very different from rounds until it’s right. With three approvers on my side, I usually need two.
February 17, 2026 at 2:45 pm in reply to: Do setup fees and plate charges still show up on mat quotes? #5335EventMktg_SanJose
ParticipantAdd small-order charges. Some printers add a line when the quantity sits just under a price break. It’s worth asking where the next break is, because sometimes a few more pieces cost less in total.
And ask what happens to the price if your quantity changes after the quote. On one show we cut the count by a dozen, and the per-piece price jumped because we fell below a break.
February 17, 2026 at 10:20 am in reply to: Do setup fees and plate charges still show up on mat quotes? #5332EventMktg_SanJose
ParticipantI compared quotes for trade show mats last quarter. One had a “file preparation” line, one had “color matching”, and one had a cutting charge because we wanted rounded corners. Digital printing has no plates, but a custom shape still needs a cutting setup, so that line wasn’t made up.
The file prep line surprised me. Our files were print-ready. I asked, and it came off.
The color matching line was real, though. Our brand blue has to match the booth backdrop, and that printer runs test prints until it does. I’d rather pay for that line than discover the mismatch at the show.
EventMktg_SanJose
ParticipantSame story here, once. I set a mail filter now so anything with “proof” in the subject goes to the top. It sounds silly, and it has saved a show at least twice.
EventMktg_SanJose
ParticipantAlso put a hard date on the designer. “Final by April 10”, in writing. Designers are great, but round six happens when nobody sets a stop.
EventMktg_SanJose
ParticipantOn whether a rush is worth it, compare the rush cost to the cost of not having the mats. For a trade show, no mats means a bare table in a booth that took months to plan, so we pay for the rush without a second thought. For a shop opening, ask what a mat does on day one. If it carries the opening offer, it matters. If it’s only the logo, it can come a week later and nobody will know.
There’s a third option people forget: open with something simple and swap later. A plain mat with a printed paper sheet on day one, and the finished mats when they’re ready. Customers at an opening look at the bikes and the free coffee, not at the counter.
EventMktg_SanJose
ParticipantA week of buffer is smart. Now ask any printer for their standard turnaround after proof approval and their rush option, and write both under your date. Then compare the “art final” date for each. If your designer can comfortably hit the standard date, you don’t need the rush.
EventMktg_SanJose
ParticipantI live in this question. Six trade shows a year, and the art is always late. Work backward from the date. Write down the day you want mats on the counter, then shipping time, then production, then the proof, then the day the art must be final. That last date is the real deadline, and it’s usually earlier than people think.
EventMktg_SanJose
Participant“I send this Friday unless you object” is going in my playbook. Enjoy the festival.
EventMktg_SanJose
ParticipantFour weeks is smart. I always keep a few days of slack for something I can’t control, like a storm closing a hub or a weekend falling in the wrong spot. The slack is cheap insurance. Paying extra to rush a job because you lost a week to approvals is the expensive way to learn it.
EventMktg_SanJose
ParticipantIn my experience, yes. Production time counts from the approved proof, not from the first one. Every round of changes pushes the whole schedule. That’s why the text check happens before the artwork goes out, not after.
My checklist for the proof itself: spelling of every word, phone number and web address typed out and checked, dates and prices on the mat, logo color, and anything near the edge. I read it out loud once. You catch more mistakes by ear than by eye, especially in your own copy.
EventMktg_SanJose
ParticipantWorking backward is exactly right. I do this for six trade shows a year, and the proof is almost never the slow part. Approval is. Here’s my rule: count the days your own team needs to say yes, then double it.
At my company, a trade show mat goes past the event lead, the brand team and sometimes legal if it has a product claim on it. Each of them takes a day or two, and someone is always on vacation. The printer is usually waiting on us, not the other way around.
My timeline, from the date the mats must be in hand:
– Shipping time to your address
– Production time after proof approval
– Your approval time, doubled
– Proof turnaround
– Artwork final, with text checked by someone who didn’t write it - AuthorPosts