...

Forum Replies Created

Viewing 28 posts - 1 through 28 (of 28 total)
  • Author
    Posts
  • in reply to: Are mats at a teller line worth it for a credit union? #5783
    FrontOffice_Vegas
    Participant

    Good pilot. Take a photo of each station at the end of every week too. You’ll see quickly if the mat is getting covered.

    And ask the tellers at the end. They’ll tell you things a QR count won’t, like whether members point at the mat and ask questions, or whether it just collects coffee rings. Our front desk staff gave us the best feedback on ours, including the note that the first version’s font was too small to read upside down from their side.

    in reply to: Are mats at a teller line worth it for a credit union? #5779
    FrontOffice_Vegas
    Participant

    How will you know if it’s worth it? That’s the question your branch managers will ask in three months. We added a line to the late checkout offer that only appears on the mat. Front desk counts how many guests mention it.

    in reply to: Are mats at a teller line worth it for a credit union? #5775
    FrontOffice_Vegas
    Participant

    Split it. Print what doesn’t change: logo, the app, “ask us about,” a QR code to the rates page. Put the changing numbers somewhere you can swap. We do that with seasonal menus. The mat has the restaurant’s name and hours, the menu lives on a card stand.

    in reply to: Are mats at a teller line worth it for a credit union? #5772
    FrontOffice_Vegas
    Participant

    Measure the spot where the member stands and puts their hands. That’s the mat. Everything the teller uses stays on the teller side. If the station is too small to have both, a smaller mat on the member side is still better than a big one covered by slips.

    With 14 inches of depth, I’d keep the mat well under that so its edge doesn’t catch under the partition. Things slide back and forth through that gap all day. A mat edge that lifts there will catch every envelope.

    in reply to: Are mats at a teller line worth it for a credit union? #5769
    FrontOffice_Vegas
    Participant

    Hotel front desk, so a different wait, but similar. Guests stand at check-in for three to five minutes and look down a lot, at their phone, their wallet, the counter. We run a printed mat with the hotel restaurant and the late checkout offer. Front desk staff say guests ask about the restaurant more since it went in.

    The pile-on problem is real though. If staff put the key card sleeves on top of the mat, it’s a coaster.

    in reply to: Are printed mats worth it on a trade show table? #5815
    FrontOffice_Vegas
    Participant

    Bring a spare to every show. Someone will set a coffee on it on day one.

    in reply to: Are printed mats worth it on a trade show table? #5812
    FrontOffice_Vegas
    Participant

    Give the mat its own QR code, one that appears nowhere else. Then compare scans per show with tablet signups. If the mat brings in signups the tablet would have missed while it was busy, that’s your answer.

    Check the times too. If scans cluster at lunch and late afternoon, when the tablet line is longest, the mat is catching overflow. If they’re spread evenly, it’s pulling in people who wouldn’t have stood in line at all. Both are good news, but they’re different stories for your boss.

    in reply to: Are printed mats worth it on a trade show table? #5807
    FrontOffice_Vegas
    Participant

    And think about how it travels. Six shows a year means it’s packed and unpacked twelve times. A mat that rolls into a tube is easy to carry, but some materials keep a curl at the edges for an hour after they come out. A flat crate keeps it flat.

    Also check whether your tablecloth is fitted or draped. On a loose draped cloth, a mat shifts every time someone leans. On a fitted cloth, it sits still. A few small pieces of removable tape under the corners fixed that for one exhibitor in our ballroom.

    in reply to: Are printed mats worth it on a trade show table? #5804
    FrontOffice_Vegas
    Participant

    Hotel front desk, but we host a lot of conventions, so I see a lot of booths in our ballrooms. The ones with something printed on the table look more finished than a cloth and a pile of brochures. And the brochures end up in our trash cans by the end of the day.

    A mat also stops the brochure fan from sliding off the cloth when people lean on it.

    FrontOffice_Vegas
    Participant

    The question customers stop asking is the best test of any counter sign. Ours was the wifi password, until it went under the clear cover. The night desk used to answer that one forty times a shift.

    FrontOffice_Vegas
    Participant

    If you go the insert route, wipe the edges, not just the top. Most of the grime that ends up under a clear cover comes in at the edges when someone wipes the middle and pushes the water outward. A barely damp cloth does the job; a wet one pushes water underneath.

    FrontOffice_Vegas
    Participant

    At our front desk we keep the local map and the wifi details under clear. Guests read it every day, so the idea works. After about a year the pens dragged across the top leave fine scratches, and the surface looks cloudy in the light. We replace it yearly.

    Before the mat we tried a loose sheet of acrylic. It slid every time a guest leaned on the desk, and a corner cracked within a month. Something flexible that grips the counter stays put much better.

    Also decide which way it faces. The sheet should read right-side up for the customer, not for staff. Staff know the prices.

    in reply to: Standard size or custom cut for an L-shaped service desk? #5516
    FrontOffice_Vegas
    Participant

    Same here. Our sister property’s desk looked identical in the drawings and came out three inches shorter on the short leg. A mat cut for our desk would have hung off theirs.

    in reply to: Standard size or custom cut for an L-shaped service desk? #5511
    FrontOffice_Vegas
    Participant

    Replacement is what pushed us toward standard sizes. With two standard rectangles, when the one where guests sign wears out, we replace that one. With one big custom piece, the whole thing goes. On a desk that runs 24 hours, the signing spot wears out years before the rest of the mat.

    in reply to: Standard size or custom cut for an L-shaped service desk? #5504
    FrontOffice_Vegas
    Participant

    Our front desk is an L too, and we went through the same debate. Start with where people actually stand. On ours, nobody uses the short leg except staff. Guests check in along the long side, sign at two spots, and that’s it.

    So before you think about the shape, stand at the desk for an hour on a busy morning and note where hands and papers land. The mat needs to cover those spots, not the whole desk.

    in reply to: Where should a QR code go on a mat and how big should it be? #5466
    FrontOffice_Vegas
    Participant

    Clean outcome. A short label that only says what the scan does is good practice anyway. Our wifi label went through three versions before “Scan for wifi” won. Shorter always scanned more.

    in reply to: Where should a QR code go on a mat and how big should it be? #5460
    FrontOffice_Vegas
    Participant

    Glare is the other killer. A glossy surface under ceiling lights throws reflections right across the code. Test it under your real lights at the time of day you’re busiest. A matte finish helps a lot, and so does moving the code out from under the brightest light.

    And think about the phones your customers carry. Ours are travelers with every kind of phone, including old ones with weak cameras.

    FrontOffice_Vegas
    Participant

    We have a wifi code on the front desk mat, with the network name printed beside it for guests whose camera won’t read the code. Two lessons. Dark code on a light background, never the reverse. And print a short line next to it saying what it does. “Scan for wifi” doubled our scans compared to a bare code, by our front desk count.

    FrontOffice_Vegas
    Participant

    One last thing from the hotel side. Empty the drip tray on the machine itself, not just the mat under it. A full drip tray overflows onto whatever sits below. Ours get emptied every time the coffee is refilled, and that habit cut our wipe-ups in half.

    FrontOffice_Vegas
    Participant

    That’s the honest version of every counter material. Resistant means it buys you time, not that you can skip the wiping. Our stone counter in the breakfast area is sealed every year, and it still shows the coffee spots if a shift forgets the trays.

    FrontOffice_Vegas
    Participant

    For what it’s worth, the breakfast area is exactly where we’d want something like that. Three machines, two locations, spares for when one gets scorched. Whatever goes there has to rinse in the sink and dry flat by the next morning.

    FrontOffice_Vegas
    Participant

    Check the steam too. A lot of machines vent steam out the top, and under a cabinet that steam ends up on the cabinet bottom. Pull the machine forward while it brews.

    And look at the water reservoir. On some machines the reservoir sits at the back and leaks a little when you refill it. That puddle goes behind the machine, where nobody looks for weeks.

    FrontOffice_Vegas
    Participant

    Our breakfast area has three coffee machines on a stone counter. We use trays with a lip under each one. Two things changed the stains: the tray catches the drips, and staff wipe the tray every hour instead of the counter once a day.

    The ring you found sounds like drips plus warmth from the base. Coffee left warm on a surface for hours is what stains. Cold drips wipe off. Warm ones sitting on a warm counter all morning are a different story.

    FrontOffice_Vegas
    Participant

    Last thing from me. Keep a folder with the file for every insert you print, named by month. Next year, when flu season comes back, you open last October’s file, change the dates and print. Our desk saves hours a year that way, and nobody has to remember how the old one looked.

    FrontOffice_Vegas
    Participant

    A tip for Pharmacy_Mgr_Tampa from experience: write the month on the back of every insert in pencil. When you have more than one window, it’s easy to leave a holiday notice in one of them until February. I’ve done it. Twice.

    FrontOffice_Vegas
    Participant

    Hotel front desk here. We have insert mats at each check-in station with the Wi-Fi details and the restaurant hours. Two things I learned:

    First, the clear top shows fingerprints. On a 24-hour desk, the night auditor wipes them twice a shift, so plan for that.

    Second, print the insert on matte paper. Glossy paper under a clear cover gives a glare from the ceiling lights, and guests can’t read it from where they stand.

    FrontOffice_Vegas
    Participant

    Good call. We put the mix ratio on a sticker on every bottle. Fewer surprises for the morning crew.

    We also keep the printed mats and the plain ones on separate drying hooks. The plain ones can take a harder scrub when they need it. The printed ones never see the scrub brush. When they hang on the same hook, the closers treat them the same.

    FrontOffice_Vegas
    Participant

    Our hotel bar went through the same debate. Some rubber mats are made to go through a commercial dish machine and some warp from the heat. Look on the mat or the paperwork for a dishwasher note. If there isn’t one, I wouldn’t risk it on the printed ones. Plain rubber runners are a different story than printed ones.

Viewing 28 posts - 1 through 28 (of 28 total)

Members, discussions and dates in threads marked Example thread are fictional. CounterMats wrote them to explain common counter mat questions in plain language.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.