Forum Replies Created
-
AuthorPosts
-
October 8, 2025 at 3:00 pm in reply to: Is a clear mat you slide paper under worth it for a menu or price list? #5310
GiftShop_AshevilleParticipantAnd print the insert on cardstock. Regular paper picks up humidity and buckles in the summer. Cardstock lies flat and doesn’t show the wrinkles through the plastic.
October 7, 2025 at 4:40 pm in reply to: Is a clear mat you slide paper under worth it for a menu or price list? #5305
GiftShop_AshevilleParticipantUse a sans-serif font, at least 24 point for the prices. Black on white or black on pale yellow. Fancy fonts look nice on the screen and terrible upside down through plastic.
October 7, 2025 at 10:10 am in reply to: Is a clear mat you slide paper under worth it for a menu or price list? #5301
GiftShop_AshevilleParticipantGlare is the one nobody warns you about. We have a pendant light right over the register, and on a clear mat the reflection sat exactly where the price list was. From the customer’s side you couldn’t read a thing.
Before you commit, put a sheet of clear plastic on the counter, slide a page under it and look at it from where a customer stands, at the busy hour.
August 28, 2025 at 4:05 pm in reply to: Where should a QR code go on a mat and how big should it be? #5469
GiftShop_AshevilleParticipantSaving this thread for our next mat. The corner placement alone fixed our basket problem. Next time I’ll also test the code late in the day, when the light through our front window is lowest.
August 27, 2025 at 4:20 pm in reply to: Where should a QR code go on a mat and how big should it be? #5464
GiftShop_AshevilleParticipantAnd look at your scan numbers after a month. A dynamic code counts scans. Ours showed almost nobody scanned on weekdays and lots of people did on Saturdays, so we changed what the code points to on weekends.
The numbers also told us when the code had stopped working. Scans dropped to zero for a week once, and it turned out the web address had changed. That’s the week we switched to a dynamic code.
August 26, 2025 at 1:00 pm in reply to: Where should a QR code go on a mat and how big should it be? #5456
GiftShop_AshevilleParticipantPlacement matters as much as size. We put ours in the corner nearest the customer, angled toward them. The first version sat in the middle of the mat, and the shopping basket covered it every time.
Look at where people set things down at your counter. That spot is off limits.
We also turned the code to face the customer’s side. Nobody turns their phone around to scan an upside-down code at a register. They just don’t scan.
GiftShop_AshevilleParticipantSmall-shop view: the per-piece price at 100 doesn’t help me much, because I need far fewer than 100. What I want to know is the total for the smallest run they will do. A great per-piece price on a quantity I can’t use isn’t a deal.
I also look at what happens to the extras. If I end up with more mats than registers, can I use them somewhere else in the store, or do they sit in a closet? For me the answer decides whether a bigger run is a bargain or clutter.
May 22, 2025 at 12:15 pm in reply to: How do you measure a counter with a lip or a rounded front edge? #5436
GiftShop_AshevilleParticipantThere is a seam, about two feet in from the wall, but it’s flush. I ran my thumbnail across it and felt nothing. I’ll note it on the sketch anyway.
May 22, 2025 at 9:20 am in reply to: How do you measure a counter with a lip or a rounded front edge? #5434
GiftShop_AshevilleParticipantSketch done, with the register beside the mat and the customer edge marked with a big arrow. Final working size is 21 by 38 inches, square end, a quarter inch off every side that meets the lip or wall.
May 21, 2025 at 11:30 am in reply to: How do you measure a counter with a lip or a rounded front edge? #5431
GiftShop_AshevilleParticipantSo my working numbers: the smallest depth is 21 and a quarter, minus a quarter inch for clearance, which gives me 21 inches. For length I measure from the right wall to where the curve starts, minus the same quarter inch.
Does the register sit on the mat or beside it? That changes the length.
May 21, 2025 at 8:45 am in reply to: How do you measure a counter with a lip or a rounded front edge? #5429
GiftShop_AshevilleParticipantMade the template last night with my kids’ leftover craft paper. The curve starts about nine inches from the left end. I’m leaning toward stopping the mat square there, because that corner holds the candle display anyway.
May 20, 2025 at 1:05 pm in reply to: How do you measure a counter with a lip or a rounded front edge? #5426
GiftShop_AshevilleParticipantJust measured with a proper tape. Inside the lip at the bottom I get 21 and a quarter inches at the right end, 21 and three quarters in the middle and 21 and a half at the left. So the counter isn’t square, like PartsDesk_Wichita said.
Should the mat go up and over the lip? It would look tidier from the customer side.
GiftShop_AshevilleParticipantUpdate for anyone planning around a date. I locked the final artwork four weeks before the festival, and my partner signed off on the text in one round. The trick was giving him a deadline instead of a question: “I send this Friday unless you object.” The rest of the refresh plan runs off the same calendar now.
GiftShop_AshevilleParticipantCounting backward with all of that, I need final artwork about three weeks before the festival to feel calm. I set myself a reminder for four weeks before, because of my partner.
GiftShop_AshevilleParticipantDoubling the approval time is painfully accurate. My business partner takes a weekend to answer anything. And the festival date doesn’t move, so I can’t let it slide like I usually do with the window.
GiftShop_AshevilleParticipantAnd print the mockup on paper at real size and put it on the counter. My logo looked huge on screen and tiny on the counter. I made it bigger on the second try.
GiftShop_AshevilleParticipantColor was my surprise. My shop’s logo is a specific teal, and on screen it looked perfect. When I printed it on flyers at the copy shop, it came out closer to green. Screens make color with light and printers make it with ink, so some bright screen colors just don’t exist in ink.
If your logo has a color that matters to you, find its official color code. A designer can tell you which one.
February 17, 2025 at 9:26 am in reply to: What size mat fits a checkout with a card reader and a scale on it? #5209
GiftShop_AshevilleParticipantLove the update. Two inches of gum rack is a very deli solution. Good luck with it.
February 12, 2025 at 7:58 am in reply to: What size mat fits a checkout with a card reader and a scale on it? #5203
GiftShop_AshevilleParticipantThat’s normal. Before I committed to anything, I taped two sheets of poster board in that spot for a week and watched where things landed. Customers put their bags down on the left side, not in the middle where I expected. If I had gone with my guess, half the mat would have been covered all day.
Paper costs nothing and it tells you more than a tape measure does.
February 11, 2025 at 10:03 am in reply to: What size mat fits a checkout with a card reader and a scale on it? #5199
GiftShop_AshevilleParticipantI went back and forth on that one. If the base sits on the mat, the reader slides a little every time someone turns it, and the mat starts to creep toward the customer. I keep the stand on the bare counter and put the mat right in front of it.
That spot works better anyway. People stare at the reader while the payment goes through, so the mat in front of it gets a few seconds of attention from everybody.
-
AuthorPosts