Forum Replies Created

Viewing 12 posts - 31 through 42 (of 42 total)
  • Author
    Posts
  • in reply to: Lead time on 1,000 mats for a chain rollout? #5348
    PromoBuyer_Chicago
    Participant

    They almost never slip in production. They slip before and after. Before, it’s approvals and the store list. After, it’s freight and receiving.

    Start with the store list, because everything else depends on it. Every address, a contact name, receiving hours and how many mats each counter needs. On a list of 300 addresses, expect a few dozen to be wrong on the first pass.

    Keep the list in one spreadsheet with one owner. The moment two versions exist, someone ships to the old one.

    PromoBuyer_Chicago
    Participant

    Before you decide on any quote, look hard at the total, not the per-piece. For a small shop, the total is what hits the bank account. Ask for it in writing, shipping included, so you can compare apples to apples. And ask how long the quote is good for, so you can plan the timing around your slow season.

    PromoBuyer_Chicago
    Participant

    Good point on asking first. Some printers count a minimum per design, and some count it per order. That one detail decides whether a group order works.

    If you do go in with other shops, put one person in charge of the artwork deadline and the payment split. Group orders fall apart when four owners each wait for the other three. I’ve seen it with business association banners more than once. Agree on the date first, then the designs.

    PromoBuyer_Chicago
    Participant

    Minimums are normal across almost all custom printing. The work to set up a job is about the same for 2 pieces or 200: preparing the file, checking the proof, matching the color, setting up the press and running test pieces until the color is right. Spread across 2 mats, that setup makes each one very expensive. Spread across a full run, it almost disappears.

    So the minimum isn’t a printer being difficult. It’s the point where the job makes sense for both sides.

    There’s also waste. The first pieces off a press run are often test pieces that get thrown out while the color settles. On a long run, nobody notices. On a run of two, the test pieces can outnumber the real ones. Digital printing has made short runs easier for paper and stickers, but a mat is a heavier product with more steps, so the math is different.

    in reply to: What does a custom printed mat cost per piece at 100? #5267
    PromoBuyer_Chicago
    Participant

    Adding all of this to my quote checklist. Final version for anyone who finds this thread:

    • Exact size, decided from the counter
    • Quantity, including spares and approval copies
    • Price per piece at that quantity
    • Setup or plate charges, first run and reprints
    • Proof rounds included
    • Shipping: one address or many, and who splits cartons
    • Reprint price with a new message

    Thanks, all. This saves me a dozen emails.

    in reply to: What does a custom printed mat cost per piece at 100? #5263
    PromoBuyer_Chicago
    Participant

    Noted. Whichever printers I compare, I’ll ask each one the same questions in the same order, so the answers line up side by side. My client’s size isn’t settled yet, so that comes first.

    in reply to: What does a custom printed mat cost per piece at 100? #5260
    PromoBuyer_Chicago
    Participant

    Fair, and that’s a separate question worth its own thread. For my client, 100 is real, so the per-piece number matters.

    in reply to: What does a custom printed mat cost per piece at 100? #5257
    PromoBuyer_Chicago
    Participant

    Agreed. So far my list is: size, quantity, shipping to how many addresses, setup or plate charges. What else?

    PromoBuyer_Chicago
    Participant

    A pilot with photos settles the argument before the big rollout instead of after. Put a date on the second photo so it actually gets taken.

    PromoBuyer_Chicago
    Participant

    Writing the disinfectant into the quote request is the step most buyers skip. Put the wipe frequency in too. “Wiped often” means nothing to a printer. Forty times a shift means something.

    PromoBuyer_Chicago
    Participant

    Then you’re probably choosing a smooth top with surface print, and the next question is how that print handles your chemistry. Ask each printer whether a clear protective coat goes over the ink, and give them the exact disinfectant your clinics use, by product name, plus how often staff wipe.

    If you already have any printed mat in the building, run your own test. Wipe one corner fifty times with your actual wipes and look at the wipe. Color on the wipe means the ink is coming off.

    Also ask whether the disinfectant leaves a film. Some do, and a film on a smooth top turns sticky after a week. That isn’t the print failing, but staff will blame the mat.

    in reply to: What file does a printer need for a logo on a mat? #5247
    PromoBuyer_Chicago
    Participant

    From the buying side: when you send artwork anywhere, ask what you will see before it prints. I want a proof at the real size, with the cut line and the safe zone marked, and I want a clear point where I say yes. If a printer starts without your yes, you own whatever comes out.

    Also keep the text short. Owners always want to add the phone number, the website, the hours and the address. On a mat, two of those is plenty.

Viewing 12 posts - 31 through 42 (of 42 total)

Members, discussions and dates in threads marked Example thread are fictional. CounterMats wrote them to explain common counter mat questions in plain language.