...

Forum Replies Created

Viewing 30 posts - 1 through 30 (of 49 total)
  • Author
    Posts
  • Deli_Owner_Queens
    Participant

    Put a date on the back of each set with a marker. You’ll know which set gets worn faster, and it’s always the one the closer likes.

    Deli_Owner_Queens
    Participant

    And the edges. On a rail, the edge facing the guest gets elbows all night. A bound or sealed edge holds up. A cut edge on a fabric top frays and then looks cheap fast.

    in reply to: Rubber, vinyl or fabric top: what holds up on a bar rail? #5692
    Deli_Owner_Queens
    Participant

    Mostly. But a bar rail isn’t a sink. Spills are small and constant, not a flood. If you have two sets and swap them every night, fabric can work. One set drying, one set down. That’s what I do at the coffee counter.

    The catch is space. Two sets of anything need somewhere to hang overnight where they actually dry. In my place that’s a rack over the mop sink with a fan on it. If your only spot is a dark storage closet, the off set will still be damp in the morning and you’re back to the smell.

    Deli_Owner_Queens
    Participant

    Fabric top on my coffee counter, rubber at the slicer. The fabric one looks great and the print is sharp. It also drinks everything. A spilled latte is gone from the top in a minute, which customers like, but it’s still in there. I rinse it every night and hang it.

    On a bar rail with sugar and citrus all night, I’d worry about how fast it dries more than about the print.

    in reply to: What size bar mat fits behind a service well? #5684
    Deli_Owner_Queens
    Participant

    Add one: tape a piece of cardboard cut to the size on the ledge for a Saturday. If servers knock it around, the mat will get knocked around too.

    in reply to: What size bar mat fits behind a service well? #5680
    Deli_Owner_Queens
    Participant

    Or keep spares. A logo mat that fades or gets burned by a hot pot is gone, and having a stack in the back beats waiting on a reprint. Whatever you pick, check the top too. A flat top under drinks turns into a puddle. Ribbed or waffle tops let the spill sit below the glass.

    in reply to: What size bar mat fits behind a service well? #5674
    Deli_Owner_Queens
    Participant

    Gap. Half an inch at each end at least. Flush looks great on day one, then the mat creeps, hangs over the edge, and somebody catches it with a tray.

    in reply to: What size bar mat fits behind a service well? #5671
    Deli_Owner_Queens
    Participant

    Not a bar, but my coffee station has the same problem. Measure the flat part only. That lip on the guest side eats an inch, maybe more, and a mat that rides up on a lip rocks every time somebody sets a cup down. Ask me how I know.

    in reply to: Is a rush order worth it for a grand opening? #5600
    Deli_Owner_Queens
    Participant

    Good luck with the opening. Put a mat by the air pump too. Everybody stands there and waits for their tires.

    in reply to: Is a rush order worth it for a grand opening? #5597
    Deli_Owner_Queens
    Participant

    And approve the proof the same day it comes in. At my second opening, the proof sat in my inbox for four days because I thought it was a delivery notice. Four days I didn’t have. Now I tell whoever sends the proof to text me as well, because a text I see in a minute and an email I see whenever.

    in reply to: Is a rush order worth it for a grand opening? #5594
    Deli_Owner_Queens
    Participant

    That’s a real plan. Write it on the wall in the back room. In opening week, nobody remembers anything they didn’t write down.

    in reply to: Is a rush order worth it for a grand opening? #5589
    Deli_Owner_Queens
    Participant

    From someone who opened two shops: opening week is chaos. The plumber, the health inspection, the register that won’t talk to the card reader. The mats were the last thing anybody thought about. I’d get them out of the way early so they’re not one more thing in a week when everything breaks.

    At my second place I made a list of everything with my logo on it: the sign, the menu boards, the cups, the mats, the aprons. Each item got its own “art final” date. The mats were the easiest one once they had a date. Before that, they were the one I kept pushing to next week.

    in reply to: Can a beverage brand put mats in stores it doesn’t own? #5482
    Deli_Owner_Queens
    Participant

    For me, my name. Customers know the deli by the name over the door. My regulars still call it by my father’s name, and he retired twenty years ago. If the mat has your logo big and my name small, it feels like I rent the counter from you.

    in reply to: Can a beverage brand put mats in stores it doesn’t own? #5476
    Deli_Owner_Queens
    Participant

    And don’t try to take over. If I carry three drink brands and your mat makes my counter look like a billboard for one, the other reps complain to me, and I take the mat off to keep the peace.

    in reply to: Can a beverage brand put mats in stores it doesn’t own? #5472
    Deli_Owner_Queens
    Participant

    Size first. Every rep who walks in assumes my counter is the same as the last one they saw. Measure it or ask me. A mat that hangs over the edge is getting cut with a box cutter, logo and all.

    And don’t put it where I set coffee down. A mat that lifts at the corner is a spill waiting to happen.

    And ask me before you swap it out. The last brand mat in my store got replaced by a rep I’d never met, with a design I’d never seen. It went in the back the same afternoon.

    in reply to: Can bar mats go in the dishwasher? #5651
    Deli_Owner_Queens
    Participant

    Adding it to the closing sheet. My closing guy is happy, since the machine does the scrubbing now.

    in reply to: Can bar mats go in the dishwasher? #5649
    Deli_Owner_Queens
    Participant

    Musty I know. That’s half the reason I wanted them washed in the first place. The other half is customers. A sticky mat right where they lean on the counter is not the impression I want at six in the morning.

    in reply to: Can bar mats go in the dishwasher? #5646
    Deli_Owner_Queens
    Participant

    Test run done last night. Soaked first, then flat on the rack, ridges up. It came out clean and flat. The second one goes in tonight.

    I’ll keep an eye on it for a couple of weeks before I call it safe. If the edges start to curl after a few washes, it goes back to hand washing in the mop sink.

    in reply to: Can bar mats go in the dishwasher? #5642
    Deli_Owner_Queens
    Participant

    Ridges up? Does it matter which way? I would have put them in face down like a tray.

    in reply to: Can bar mats go in the dishwasher? #5638
    Deli_Owner_Queens
    Participant

    No label that I can find. They were part of the coffee setup when we remodeled, and nobody kept the paperwork.

    in reply to: Do mats at the register actually sell more add-ons? #5404
    Deli_Owner_Queens
    Participant

    Results, as promised. The register with the laminated offer sold more combos in all four weeks, even after we swapped registers in week three. Not a miracle, but enough that the accountant is now asking what the January offer is.

    My nephew is unbearable.

    in reply to: Can I design my own mat if I don’t have a designer? #5547
    Deli_Owner_Queens
    Participant

    Do it at the busiest time of day, too. My test sheets looked great at three in the afternoon. At seven in the morning there’s a coffee cup on every inch of the counter, plus a newspaper, two phones and somebody’s keys. Whatever you print has to work with half of it covered.

    in reply to: Can I design my own mat if I don’t have a designer? #5542
    Deli_Owner_Queens
    Participant

    That last one. My register mat at the old place had our phone number exactly where the tip jar went. For two years nobody saw the number, and I wondered why nobody called in orders.

    in reply to: Can I design my own mat if I don’t have a designer? #5539
    Deli_Owner_Queens
    Participant

    I did my own menu boards for years with a free tool, so here’s the non-designer version. Keep it boring. My first menu board had four fonts and a photo of a sandwich behind the prices. Nobody could read the prices. Second version: black text, white background, one font, logo in the corner. The specials started selling because people could finally read them.

    A mat is the same thing, only flat. If you can read it from where the customer stands with a coffee in one hand, it works.

    in reply to: Do mats at the register actually sell more add-ons? #5401
    Deli_Owner_Queens
    Participant

    OK, I’m going to do CStore_Owner_Ohio’s test before I spend anything. Two registers, same deli. I’ll laminate the offer at the copy shop and tape it flat in front of one register, nothing at the other, for a month. I’ll count the combos on the register report.

    in reply to: Do mats at the register actually sell more add-ons? #5396
    Deli_Owner_Queens
    Participant

    That’s more useful than anything my nephew said. How often did you change it?

    Deli_Owner_Queens
    Participant

    Also, spares make good thank-yous. Give a couple to whoever sponsors your group ride or to the shop next door. Everybody has a coffee maker that needs something under it.

    Deli_Owner_Queens
    Participant

    They lie flat. A stack of mats takes up about as much room as a case of paper cups. Put it under a shelf or on top of a cabinet and forget about it until you need one.

    Here’s another idea. Talk to the shops on your block about going in together, everybody’s own logo in one run, and split the box at the end. Ask the printer first whether they allow different designs in one run.

    Deli_Owner_Queens
    Participant

    Price list is done: 18 items, 28 point, black on white, cardstock. Customers already stopped asking me how much the egg sandwich is. That alone is worth something at 7 a.m., when the line is out the door and every question costs a sandwich.

    When eggs go up again, I print a new sheet, trim it and swap it in under a minute. No tape.

    Deli_Owner_Queens
    Participant

    Did the glare test this morning with a plastic folder cover. The light over my register is behind the customer, so no glare. The paper slid around, though, so I’ll trim it to fit snug inside the edge.

    I also tried it with the list facing me and then facing the customer. Facing the customer is obviously right. I read it upside down faster than any customer ever will.

Viewing 30 posts - 1 through 30 (of 49 total)

Members, discussions and dates in threads marked Example thread are fictional. CounterMats wrote them to explain common counter mat questions in plain language.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.